User manual

i-CON 1 / 25
3BA00180 • 28.04.2008 • Rev. 1
Operating instructions
6.4.3 Password lock
The data of the station can be protected by a 4-digit (0001-9999) password. This
way, settings/changes can be prevented. The station does not come with activated
passwordlock;thisisindicatedby“0000”inthepasswordinputeld.
The symbol asignalizesthatthestationisprotected.Factorysetting:[0000]=un-
locked.
Please memorize your selected password thoroughly or note it down
at a safe spot. Only ERSA can deactivate a forgotten password. If you
have an i-Set Tool with the saved factory settings, you can also unlock
the station on your own.
6.4.3.1 Setting the password
Proceed as follows in order to activate the [password] function:
■
Openthecongurationmode,selectthe[change]item.
■
Activate the [Password] function via turning the i-OP.
■
Press the i-OP to activate the cursor, pressing the i-OP subsequently
de-activates the cursor.
If the cursor is activated, the value of the parameter is changed ac-
cordingly when the i-OP is turned.
■
Enter the desired password (number between “0001” and “9999”) by
turning the i-OP: Clockwise up, counter-clockwise down.