User manual

5. Funktionsbeschreibung Functional description
5.3.7 Passwortfunktion (P)
Über die Passwortfunktion kann die Station vor
unbeabsichtigten und unbefugten Parameter-
veränderungen geschützt werden. Als Passwort
ist die Eingabe einer Zahl zwischen 0 und 999
möglich. Der Wert 0 (Display 000) zeigt, dass
die Passwortfunktion nicht aktiv ist. Nach der
Eingabe einer Ziffernfolge und der Übernahme
mit der ENTER Taste erscheinen drei Striche
(Display - - -). Ab diesem Zeitpunkt ist die Station
geschützt. Sämtliche Einstellungen können wei-
terhin angesehen werden.
Zum Deaktivieren des Passwortes werden im
entsprechenden Menü wieder die drei Striche
dargestellt (Display - - -). Nun muss das Passwort
eingegeben und mit der ENTER Taste bestätigt
werden. Ist das Passwort korrekt, so erscheinen
im Display wieder die drei Nullen (Display 000),
im Fehlerfall bleiben die drei Striche stehen.
Das Passwort ist für alle Programme das glei-
che, d.h. es ist vom eingestellten Programm
unabhängig. Eine Programmauswahl (manuell /
Tool Selector) ist auch bei aktiviertem Passwort
möglich.
Will der Anwender einen Parameter bei
geschützter Station ändern, muß die Station
über das Passwort freigegeben werden. Durch
die (+)/(-) Tasten wechselt die Anzeige sofort
zur Passworteingabe. Nun kann über die (+)/(-)
Tasten das Passwort eingestellt und mittels
der ENTER Taste bestätigt werden. Die Station
überprüft das Passwort und kehrt zum Parame-
ter zurück.
5.3.7 Password Function (P)
By means of the password function, the station
can be protected against accidental or unautho-
rized parameter changes. The password can be
entered in the form of a number between 0 and
999. The value 0 (display: 000) indicates that the
password function is disabled. After a sequence
of digits has been entered and conrmed by
pressing the ENTER key, three dashes (- - -)
are displayed. The station is password-protected
as of this point in time. All settings can still be
viewed.
To disable the password function, the three
dashes (- - -) are displayed again in the cor-
responding menu. The password must now be
entered and conrmed with the ENTER key. If
the password is correct, then the three zeros
(000) are again displayed; the dashes remain
displayed in the event of an error.
The password is the same for all programs, e.g. it
is independent of the preset program. A program
choice (manual / Tool selector) is also possible
with an activated password.
If the user wants to change a parameter at a
password protected station, the station must be
unblocked by the password. The display chan-
ges immediately to enter password by the (+)/(-)
keys. Then the password can be entered with the
(+)/(-) keys and can be conrmed by ENTER key.
The station checks the password and returns to
the parameter.
31