Datasheet

14
15
Your Guide
The electronically tempera-
ture-controlled ANALOG 60
soldering station is the basic
model of the ERSA soldering
station series. It has the tried
and proven ERSA RESIS-
TRONIC temperature control
technology, with the ceramic
PTC heating element serving
as the temperature sensor.
The high initial power enables
fast heat-up.
The large selection of solder-
ing tips allows a broad range
of applications. The internal
heating provides high thermal
effi ciency. A front-installed
socket with integrated, high-
impedance allows potential
equalization between the
soldering tip and the work-
place.
The device is primarily used
for smaller and medium-sized
solder joints. The low-voltage
operated soldering iron Basic
Tool 60 has a highly fl exible,
heat-resistant connecting
cable.
ERSA ANALOG 60 Soldering Station
ANALOG 60
with Basic Tool 60 soldering iron, ERSA RESISTRONIC control system
832 and 842 soldering tip series see page 38 / 39
Basic Tool 60 with powerful PTC heating element
ERSA Tip Reactivator
Application example
Application example
Order no. Description Rating / Voltage Heating time Temperature
range
Weight
(w/o cable)
0ANA60 ANALOG 60 soldering station complete
with Basic Tool 60 soldering iron 0670CDJ, with
soldering tip 0832CDLF and tool holder 0A41
60 W / 230 V, 50 - 60 Hz / 24 V
60 W (at 350 °C) approx. 60 s (280 °C)
150 °C - 450 °C
60 g
ERSA ANALOG 60 A Soldering Station
Order no. Description Rating / voltage Heating time Temperature
range
Weight
(w/o. cable)
0ANA60 A ANALOG 60 A soldering station complete
with Ergo Tool soldering iron 0680CDJ, with
soldering tip 0832CDLF and tool holder 0A42
60 W / 230 V, 50 - 60 Hz / 24 V
60 W (at 350 °C) approx. 60 s (280 °C)
150 °C - 450 °C
60 g
ANALOG 60 A
with Ergo Tool soldering iron, ERSA RESISTRONIC control system
832 and 842 soldering tip series see page 38 / 39
The electronically temperature-
controlled ERSA ANALOG
60 A soldering station is anti-
static according to the MIL-
SPEC / ESA standard and has
all the positive features of the
ERSA ANALOG 60.
It has the tried and proven
ERSA RESISTRONIC tem-
perature control technology
based on the ceramic PTC
heating element and the fast
heat-up characteristics.
Internally heated tips guaran-
tee high thermal effi ciency. The
unusually wide range of tips
allows a varied range of appli-
cations. The front-installed
potential equalization socket is
connected with high impedance
to the soldering tip.
The light and slim Ergo Tool
soldering iron has a highly
fl exible, heat-resistant and
antistatic connecting cable.
The ANALOG 60 A soldering
station is especially suitable for
producing small and medium-
sized solder joints. For tip
changing we recommend the tip
exchanger 3ZT00164 with an
additional fl at nose pliers and
side cutter (see p. 30).
Dry sponge for dry tip cleaning
Application example
Application example
Ergo Tool: slim and ergonomic soldering iron