Datasheet

32
33
Your Guide
ERSA solder wire consists
exclusively of high-quality
raw materials. Manufactured
on state-of-the-art machines,
the wire meets all quality
requirements.
It is manufactured in different
dimensions and with different
alloys, to meet all practical
requirements.
Different types of “flux cores”
allow individual adaptation to
all soldering needs, especially
in electronics and the elec-
tronics industry.
ERSA desoldering wicks
are saturated with halogen-
free No-Clean flux. They
are suitable for protectively re-
moving excess solder and old
solder, especially from boards
carrying SMD components.
A fine copper fabric with high
capillary power ensures opti-
mal desoldering results. The
additional use of a flux cream
may be appropriate under
certain circumstances.
The ERSA Tip-Reactivator
allows the regeneration of
oxidized soldering tips. It is
environmentally safe, free of
lead and halogens and func-
tions even at low soldering tip
temperatures. For this purpose
the heated soldering tip is
wiped on the surface of the
regeneration compound.
ERSA bar solder, like solder
wire, is recovered from initial
melt solder. It is primarily
used for filling solder baths.
For easier melting, it can be
supplied as required in 50 mm
sections. In combination with
soldering irons of greater
power and with suitable flux,
bar solder is also used for
soldering cable lugs of larger
cross-sections and in sheet
metal work.
ERSA No-Clean Flux and
Flux Cream have proven their
merit especially in all repair
processes in SMD technology.
Like all ERSA consumables,
they meet the applicable
standards and quality re-
quirements. They can be
easily and precisely applied
by means of the Flux- Pen
or cartridge, supplied with
plunger and needle.
Excess residue is removed, if
necessary, by means of the
Flux Remover with the aid of
absorbent, non-pulping paper
towels or specially offered
ESD-safe products.
ATTENTION: According to
the EU Directive as of July 1,
2006 lead may no longer be
used in electronic assemblies.
ERSA Flux and Flux Remover
ERSA Desoldering Wicks
Order no. Description Quantities Danger sign
0FMKANC32-005 No-Clean flux cream, EN 29454/1.1.3 C 5 ml cartridge 1); 3)
0FMKANC32-200 No-Clean flux cream, EN 29454/1.1.3 C 200 ml can 1); 3)
4FMJF8300-005 Flux gel 8300 for rework, EN 29454-1/1.2.3 C
(F-SW33), resinous, halogen-free, low residues
5 ml cartridge 1); 3)
4FMJF8001-PEN Flux-Pen with IF 8001 flux, EN 29454/2.2.3 A
(F-SW 34/DIN 8511)
7 ml 1); 2)
0FMIF8001-001 IF 8001 flux, EN 29454/2.2.3A 100 ml 1); 2)
4FMJF6000-PEN Flux-Pen with IF 6000 Flux, for lead-free
rework, EN 29454/1.1.3 A, solid 7.5 %
7 ml 1); 2)
0FMIF6000-001 Flux IF 6000 for lead-free rework,
EN 29454/1.1.3.A (F-SW 32), resinous,
halogen-free, long activation time, low residues,
solid 7.5 %
100 ml 1); 2)
0FMIF2005-002 IF 2005 M low-solid No-Clean flux
EN 29454/2.2.3 A
200 ml sprayer 1); 2)
0FR200 Flux Remover 0FR200, with brush 0FR202 and
protective cap 0FR203
200 ml cartridge 1); 2); 3)
Flux cream
ERSA No-Clean flux creams available in different quantities
ERSA Tip-Reactivator
Order no. Description Package size
0WICKNC1.5/10 No-Clean wicks, length 1.5 m, width 1.5 mm 10 pcs.
0WICKNC1.5/SB No-Clean wicks, length 1.5 m, width 1.5 mm single-piece package
0WICKNC2.2/10 No-Clean wicks, length 1.5 m, width 2.2 mm 10 pcs.
0WICKNC2.2/SB No-Clean wicks, length 1.5 m, width 2.2 mm single-piece package
0WICKNC2.7/10 No-Clean wicks, length 1.5 m, width 2.7 mm 10 pcs.
0WICKNC2.7/SB No-Clean wicks, length 1.5 m, width 2.7 mm single-piece package
0WICKNC4.9/10 No-Clean wicks, length 1.5 m, width 4.9 mm 10 pcs.
0WICKNC4.9/SB No-Clean wicks, length 1.5 m, width 4.9 mm single-piece package
Desoldering wicks
Flux Remover
Order no. Description Quantity Danger sign
0TR01/SB Tip-Reactivator, lead-free 15 g can 1)
Flux-Pen
ERSA Bar Solder
Bar solder
High-quality bar solder recovered from initial melt solder to refill
solder baths.
ERSA Solder Wire
Solder wire
Available in different alloys and drum sizes
in order to meet various fields of applica-
tion. Please refer to the ERSA price list or
to www.ersa.com for a detailed list including
wire diameters.
Tip-Reactivator
1) = Xi Irritating
3) = N Environmentally
hazardous
2) = F+ Highly inflammable
Order no. Alloy Melting temperature Delivered in
4LOT230GAG3.5CU0.7 Sn95.8Ag3.5Cu0.7 217 - 218 °C
Bars of approx. 230 g
4LOT230G64B Sn64Pb36 183 °C Bars of approx. 230 g
Solder alloy according to
DIN EN 29453
Flux according to DIN EN ...
... % flux share
Melting temperature (°C)
Sn96.5Ag3.0Cu0.5
29454 art. 1, type 1.1.3.B, or DIN EN 61190-1-3, ROL 0 3.5 %,
halogen-free
217
Sn96.5Ag3.0Cu0.5 29454, type 1.2.3.,
J-STD-004 RE/LO 1.6 %, halogen-free 217 - 219
Sn96.5Ag3.0Cu0.5 29454, type 1.2.3.,
J-STD-004 RE/LO 2.2 %, halogen-free 217 - 219
Sn99.3CuNiGe0.7
(based on Sn99.3Cu0.7)
29454 art. 1, type 1.1.3.B, or DIN EN 61190-1-3, ROL 0 3.5 %,
halogen-free
227
Sn99.3Cu0.7 29454, type 1.2.3.,
J-STD-004 RE/LO, 1.6 %, halogen-free 227
Sn96.5Ag3.5
29454 art. 1, type 1.1.3.B, or DIN EN 61190-1-3, ROL 0 3.5 %,
halogen-free
221
Sn96.5Ag3.5 29454, type 1.2.3.,
J-STD-004 RE/LO, 1.6 %, halogen-free 221
Low-residue, halogen-free No-Clean solder wire. Especially adapted to the requirements in electronics production. The flux stands out by high temperature
resistance, and it does not spray while melting. The light, solid flux residues are neither corrosive nor electrically conductive. Consequently it is not necessary to
remove them from the solder joint.
Sn60Pb40 29454/1.1.2, 2.2 % 183 - 190
Sn60Pb40 29454/1.2.3, 1.4 % 183 - 190
Sn60Pb39Cu1 29454/1.1.2, 2.2 % 183 - 190
Sn63Pb37 29454/1.1.3, 2,2 %, halogen-free, eutectic 183
Sn63Pb37 29454, type 1.2.3,
J-STD-004 RE/LO, 0.9 %, halogen-free 183
Sn63Pb37 29454, type 1.2.3,
J-STD-004 RE/LO, 0.6 %, halogen-free 183
Sn62Pb36Ag2 29454, type 1.2.3,
J-STD-004 RE/LO, 0.6 %, halogen-free 178 - 188
subject to changes