Datasheet

28
29
100
50
Your Guide
The device can be used to
handle nearly all components,
except MELFs and MiniMELFs.
This tool consists of a nickel-
plated aluminum handle, seal-
ed at the rear end by a plug.
When opened, replacement
tips and suction cups can be
stored here.
The ERSA 185 PZ plastics
welding device can be used
to cut, weld and seal thermo-
plastic foil, fabric and sealing
sections. In cutting plastic
cords, the 185 PZ simultane-
ously welds the ends, to
prevent untwisting.
In certifi ed businesses and
from a quality standpoint,
regular checking of the
soldering tip temperature is
obligatory. Viewed through
their entire service life,
ERSA soldering stations are
extremely temperature-stable
depending on the system.
Possible differences between
the rated and actual data due
to differences in tips or to
slight heating element tole-
rances in the RESISTRONIC
control system can be easily
ascertained with the DTM 50
and DTM 100 temperature
measuring devices and
corrected easily and fast on
nearly all ERSA soldering
stations.
The measurement is practi-
cally conducted by cleaning
the heated soldering tip with
a moist sponge and soaking
it in new solder. The soldering
tip is then connected to the
given temperature sensor and
the temperature determined
as soon as the display has
stabilized.
The VAC 2, VAC 3 and VAC X
desoldering devices are
distinguished by their high
suction power and low-recoil
desoldering. The antistatic
design of the devices allows
desoldering work on electro-
statically endangered
assemblies.
The long, slim desoldering
tips also allow soldering
operations on tightly as-
sembled PCBs.
The Soldapullt AS 196
model is distinguished by ex-
tremely good recoil damping
and has proven its merit many
times over in industry.
The dual seal ring system
guarantees constant suction
power on a high level.
ERSA SVP 100 Vacuum Pipette
SVP 100
Vacuum pipette
ERSA DTM 50 & DTM 100 Temperature Measuring Devices
ERSA Desoldering Devices
DTM 100
The DTM 100 is equipped with a patented sensor unit (K-type) with sensor wires made of chromel
and alumel. It provides exact temperatures of even fi nest soldering tips.
Order no. Description Measuring range Operating
temperature
Power supply Dimensions (mm)
without sensor unit
Weight
0DTM050 DTM 50 temperature measuring
device, packed in a plastic case
-50 °C to +1,150 °C
0 °C to +45 °C 9 V fl at battery
6F22
100 x 60 x 26 mm approx. 134 g
0DTM050P DTM 50 temperature measuring
device with calibration certifi cate,
packed in a plastic case
-50 °C to +1,150 °C
0 °C to +45 °C 9 V fl at battery
6F22
100 x 60 x 26 mm approx. 134 g
0DTM100 DTM 100 temperature measuring
device, packed in a plastic case
-50 °C to +1,150 °C
0 °C to +45 °C 9 V fl at battery
6F22
100 x 60 x 26 mm approx. 134 g
0DTM100P DTM 100 temperature measuring
device with calibration certifi cate,
packed in a plastic case
-50 °C to +1,150 °C
0 °C to +45 °C 9 V fl at battery
6F22
100 x 60 x 26 mm approx. 134 g
DTM 50
temperature measuring device with fl exible
NiCrNi thermocouple (K-type)
Soldapullt AS 196
Proven desoldering device with plastic housing and extremely good recoil damping
VAC 2
Slim antistatic desoldering device with metal housing
VAC X
Antistatic desoldering device with plastic housing
Order no. Description Desoldering tips Suction capacity
0VAC2 VAC 2 antistatic desoldering device 0VAC22 (2 pcs.) 8.9 cm³
0VAC3 VAC 3 antistatic desoldering device 0VAC32 (2 pcs.) 10 cm³
0VACX VAC X antistatic desoldering device 0VACX2 (2 pcs.) 11.3 cm³
0AS196 Soldapullt AS 196 antistatic desoldering device
0LS197 34 cm³
Order no. Description Length Housing diameter Cup diameters Weight
0SVP100
SVP 100 vacuum pipette complete with bent tip
0SVP12K and 3 silicone cups 0SVP13A
150 mm 14 mm 4 mm, 6 mm,
9 mm
69 g
Also available
with calibration
certifi cate
Also available
with calibration
certifi cate
VAC 3
Slim antistatic desoldering device with plastic housing
ERSA IRHP 200 Infrared Rework Heating Plate
Order no. Description Heated area Rating /
voltage
Temperature range Weight
0IRHP200 IRHP 200 infrared rework heating plate
with control station 0RA4500D
260 x 135 mm (L x W) max. 800 W /
230 V~, 50 - 60 Hz
50 °C - 600 °C (at the
heating element)
approx. 4 kg
Application example with optionally
available X/Y PCB table 0IR5500-01
IRHP 200
Electronically temperature-controlled infrared rework
heating plate with integrated thermocouple, incl. control station 0RA4500D
The ERSA IRHP 200 is a
compact and ergonomically
designed heating plate to
preheat all SMD components
as well as assemblies and
substrates during the hand
soldering process. It can also
be used to reflow solder one-
sided SMD boards and for
reballing BGAs.
The heating plate tempera-
ture can be adusted continu-
ously from 50 °C to 600 °C.
The IR emitters' even heat
distribution ensures non-
contact, gentle heating of the
assembly. Thus the IRHP 200
is perfectly suited for lead-
free applications.
The control station can be
placed independently from
the heating plate on the work-
bench in an ergonomically
favourable way.
ERSA 185 PZ
Plastics welding device
Order no. Description Rating /
Voltage
Heating time Temperature
range
Weight
(w/o cable)
0185PZ ERSA 185 PZ plastics welding device with
welding blade 0182PZ004
180 W / 230 V approx. 5 min approx. 370°C 370 g
ERSA Special Tools