Datasheet

26
27
Your Guide
ERSA EA 110 plus i Solder Fume Extraction
The new EA 110 plus i
filtering device is a compact
and efficient system with
economical air recirculation.
Thanks to the continuously
variable suction power, the
device can be adapted to any
given situation. It can suction
the solder fumes from one
or two workplaces effectively
and economically.
The variable setup and instal-
lation options allow use even
where space is limited.
The solder fumes are filtered
in two stages:
first, the particulate filter
removes smallest suspended
particles from the suctioned
air. Harmful gases are then
absorbed in the activated
carbon filter.
The powerful suction turbine
provides a nearly constant
suction flow during the filter’s
entire service life. The filtering
action is monitored by means
of a time limit and constant
monitoring of the suction
power. The user is promptly
notified of a necessary filter
change by visual and acoustic
signals.
For protection of the drive mo-
tor, the ERSA EA 110 plus i has
an automatic cut-off feature.
The combination filter can
be changed fast and easily
without tools after the housing
upper part is removed.
Two suction arms, three
suction nozzles and a check
valve are available for differ-
ent work conditions.
The plug-in system with its
flexible suction arms allows
fast adaptation to altered
conditions at the soldering
workplace.
Especially noteworthy is
the low noise level, allowing
use of the device not only in
production, but also in repairs,
engineering and in the lab.
The decentralized design
requires no extensive pipe
system and affords the great-
est possible flexibility.
Table mounting, order no. 3CA06-9001
extremely
quiet
Order no. Description Dimensions (L x W x H) Rating /
Voltage
Volume flow /
vacuum
Noise level Filter
0CA08-002 ERSA EASY ARM EXTRACTION
EA 110 plus i filter unit complete
with i-
CON interface
460 x 210 x 470 mm 100 W /
100 - 250 V
50 - 60 Hz
140 m
3
/h max. /
2,200 Pa
51 dB (A) max. HEPA
activated
carbon
EA 110 plus i
Powerful solder fume extraction unit for the workbench for up to 2 extraction arms.
Please select the extraction arms and nozzles suitable for your requirements from our
wide range of accessories.
Accessories for the EA 110 plus i
3CA06-4001
Extraction arm with 700 mm flexible hose,
incl. connecting hose, table mounting and
quick coupling
3CA06-4002
Extraction arm 1,000 mm flexible hose (to
be installed directly at the EA 110 plus filter
unit) with 2 quick couplings
3CA06-5001
Metallic nozzle,
50 mm ø
3CA06-5002
Antistatic nozzle, plastic, transparent.
190 x 100 mm
3CA06-5004
Nozzle “Plus“, plastic, ESD,
215 x 90 mm
3CA06-9006
Stop valve for extraction arm
low
maintenance &
easy to clean
Accessories & Process Material
All about soldering - supplied from one source: ERSA special devices
and tools, temperature measurement devices, auxiliaries and con-
sumables for the production and repair of high-quality boards.
EA110 plus i solder fume extraction with
i-CON C soldering stations