Datasheet

22
23
Your Guide
This desoldering station is
suitable for removing residual
solder and for desoldering
wired components, even
from multilayer PCBs. The
station consists of the ERSA
DIGITAL 2000 A described
on pages 20 and 21, a
vacuum unit with the X-Tool
desoldering iron and the
0A44 tool holder. The de-
soldering tip is heated by two
PTC heating elements.
A thermocouple temperature
sensor near the desoldering
tip immediately reacts to any
heat loss. Practically delay-
free reheating is therefore
ensured.
The vacuum for suctioning
the liquefied solder is im-
mediately available when the
push-button is pressed.
The recesses of the tool holder
0A44 allow exchanging
inserted soldering tips, even
when hot, without an addi-
tional tool.
ERSA DIGITAL 2000 A Desoldering Station with Vacuum Unit
Order no. Tip holder Equipped with 212... ERSADUR soldering
tips
Equipped with 422 desoldering tip pairs
0SMD8012 SMD 8012 tip holder, complete ...BDLF, ...CDLF, ...EDLF, ...KDLF ...ED, ...FD1, ...FD2, ...QD1, ...QD3,
...QD4, ...QD2, ...MD
0SMD8013 SMD 8013 tip holder, complete
...BDLF, ...CDLF, ...EDLF, ...MS, ...WD, ...SDLF,
...FDLF, ...GD
...ED, ...FD1, ...FD2, ...FD4, ...FD5,
...FD6, ...QD3, ...QD5, ...MD, ...SD
ERSA SMD 8012
ERSA SMD 8013
212 soldering tip series see page 42,
422 desoldering tip series see page 41
Flux Cream
A wide range of accessories and consum-
ables, process descriptions on soldering and
desoldering are available at: www.ersa.com
The SMD 8012 and SMD 8013
tip holders are equipped with
the latest soldering tips or de-
soldering tip pairs, in particular
for SMD techno logy. Tips can
be stored neatly arranged in a
space-saving way for quick
access.
The range of currently avail-
able soldering tips and desol-
dering tip pairs, with the compo-
nent-specifi c dimensions, can
be found on pages 41 and 42.
All soldering tips and desolder-
ing tip pairs are manufactured
according to the ERSADUR
process. They have excellent
thermal conductance and a
long service life.
ERSA SMD 8012 and SMD 8013 Tip Holders
* incl. tip and cable
Order no. Description Rating / Voltage Vacuum Temperature
range
Weight
0DIG20AXT DIGITAL 2000 A desoldering station complete
with vacuum unit 0CU103A,
X-Tool desoldering iron 0720EDJ,
tip 0722ED1226, holder 0A44
80 W / 230 V, 50 - 60 Hz / 24 V
45 W
2 x 60 W (350 °C)
800 mbar max.
50 °C - 450 °C 1.25 kg
approx. 240 g*
X-Tool
with vacuum unit
with electronic station 0DIG203A and
ERSA SENSOTRONIC control system
722 desoldering tip series see page 39
Figure
with optional rack and 0A08MSET
The new HR 100 A uses
ERSA’s revolutionary and
patented Hybrid Rework Tech-
nology for safe removal and
replacement of small SMDs
in a lead-free environment!
Safe, medium-wave IR radia-
tion combined with a gentle
hot air stream guarantees
optimal energy transfer to the
component.
The Hybrid Tool delivers smooth
and homogeneous heat to lead-
free components sizing from
0201s to 20 x 20 mm SMDs
and even larger. Exchangeable
Hybrid Adaptors focus 200 W of
safe hybrid heating power onto
the component while protecting
neighboring areas from blowing
away adjacent chips.
The user friendly operation
allows for even non-experi-
enced operators to handle
the HR 100 A safely and
quickly. Advanced operators
using the HR/IRHP 100 A
complete system can not only
set air volume and heating
power levels, but they can
also run and record profi les!
The ergonomically designed
Hybrid Tool handle contains a
positioning laser which helps
the operator to focus the heat
precisely throughout the entire
process.
ERSA HR 100 A Hybrid Rework System
HR 100 A
with Hybrid Tool rework iron with patent pending heating
technology and VacPen vacuum pipette
ERSA Hybrid Tool with 200 W heating power and positioning laser (class II) in the handle, weight 300 g
Rapid, simple and safe hand-held
component removal
Temperature-controlled SMD soldering
Order no. Description Rating / Voltage Heated area Weight
(w/o. cable)
0IRHR100A HR 100 A hybrid rework system complete
with Hybrid Tool rework iron - 3IRHR100A-01, VacPen vacuum
pipette 0VP020, hybrid adaptors 0IRHR100A-14, -15, -16
and adaptor changer 0IRHR100A-24
200 W / 230 V / 50-60 Hz
6 x 6 mm up to
20 x 20 mm
300 g
0IRHR-ST050
Recommended acessories:
Hybrid rework tripod complete
Technical Highlights:
• Hybrid Tool with 200 W heating element;
positioning laser in the Hybrid Tool
handle
• Three exchangeable Hybrid Adaptors
(6 x 6 mm, 10 x 10 mm and 20 x 20 mm)
• Low Noise Rework Blower (below 40dB)
• Integrated vacuum pump & VacPen, tool
holder and K-type TC input socket, USB
interface, LED display, “Turn & Push”
control
• 2 Channel Temperature Recording: TC &
IRS; AccuTC and Flexpoint TC holder
(optional)
• Hybrid tool holder with axis height adjust
& lock
• X-Y PCB board holder (290 mm x 250 mm)
• 800 W IR heating plate with glass cover:
125 mm x 125 mm high-performance IR
heating element
• Closed Loop Profi les with ERSA IRSoft
rework documentation software, User
Level Access
Recommended Accessories
It is highly recommended to purchase the
complete system (1IRHR100A-HP) with an
optional process cooling fan. When using the
HR 100 A alone, it is highly recommended to
purchase an AccuTC and Flexpoint TC holder
for maximum rework safety. For a complete
listing of all rework accessories, please refer
to our Rework Catalog.
Powerful bottom-side process cooling fan
(0IR5500-13) for rapid PCB cooling
AccuTC thermocouple ( 0IR6500-01) and
Flexpoint TC holder ( 0IR5500-35)