Datasheet

20
21
Your Guide
The ERSA DIGITAL 2000 A
is a top-class microprocessor-
controlled soldering station
distinguished by its fl exibility
and multifunctionality. It is
antistatic according to the
MIL-SPEC / ESA standard
and is designed for industrial
use where high quality is de-
manded and for repairs and
laboratory applications.
The device can alternatively
be operated with various sol-
dering and desoldering tools.
Besides the Power Tool and
Tech Tool universal soldering
irons, the Micro Tool micro-
soldering iron, the Chip Tool
desoldering pincette and the
X-Tool desoldering iron can be
connected.
The tools are automatically
detected when inserted and
the control characteristics
accordingly adapted. The
soldering and desoldering tips
are therefore always con-
nected with high impedance
to the front-installed potential
equalization socket.
The station is easy to oper-
ate and user-friendly. The
desired temperatures, the
unit of temperature (°C/°F),
the stand-by time of 0 to
60 minutes, a tip offset and
calibration feature and a
three-character password-
controlled lock can all be set
with just three buttons and
a simple menu guide. The
energy feature allows you
to infl uence the heat-up and
reheating characteristics.
In addition, the soldering
station has 4 programs. Each
program can be separately
and differently confi gured
with the aforementioned
functions.
A fi xed program is assigned to
each soldering and desolder-
ing tool. The station automati-
cally changes the program in
case of a tool change.
If only one tool is used, all
programs can also be used.
A 5th program slot contains
a temperature measuring
function. For this purpose the
temperature sensor DIG207
is required.
The calibration feature allows
the actual soldering tip tem-
perature to be precisely
adjusted to the temperature
shown in the LED display. For
this purpose a suitable solder-
ing tip temperature measuring
device, such as the ERSA
DTM series (see page 29), is
required.
The ERSA DIGITAL 2000 A
soldering station regulates the
temperature through a digital
PID algorithm, optimized for
very precise and fast tempe-
rature control.
All connectable soldering and
desoldering devices have
enormous power reserves
thanks to the PTC heating ele-
ments located inside the tips.
At a peak temperature of
280 °C the following power is
available, for example:
• Power Tool – 105 W
• Tech Tool – 70 W
• Micro Tool – 30 W
• Chip Tool – 2 x 30 W
• X-Tool – 120 W.
These power reserves also
ensure safe and top-quality
soldering and desoldering
results.
All soldering and desoldering
tools are operated at the low
voltage of 24 V and have a
highly fl exible, heat-resistant
and antistatic connecting
cable.
For tip changes we recom-
mend the tip exchanger
3ZT00164 with fl at nose pliers
and side cutter (see page 30).
ERSA DIGITAL 2000 A Soldering Station
DIG20A84
with Power Tool soldering iron and ERSA
SENSOTRONIC control system
832 and 842 soldering tip
series see page 38 / 39
Power Tool
with ERSA SENSOTRONIC control system
832 and 842 soldering tip series
see page 38 / 39
Tech Tool
with ERSA SENSOTRONIC control system
612 soldering tip series
see page 40
Micro Tool
with ERSA RESISTRONIC control system
212 soldering tip series
see page 42
Chip Tool
with ERSA RESISTRONIC control system
422 desoldering tip series
see page 41
Order no. Description Rating / Voltage Heating time Temperature
range
Weight
(w/o. cable)
0DIG20A84 DIGITAL 2000 A electronic station complete with
Power Tool soldering iron 0840CDJ,
soldering tip 0842CDLF, tool holder 0A42,
and dry sponge with container 0A08MSET
80 W / 230 V, 50 - 60 Hz / 24 V
80 W (350 °C) approx. 40 s (280 °C)
50 °C - 450 °C
approx. 50 g
0DIG20A64 DIGITAL 2000 A electronic station complete with
Tech tool soldering iron 0640ADJ,
soldering tip 0612ADLF, tool holder 0A42,
and dry sponge with container 0A08MSET
80 W / 230 V, 50 - 60 Hz / 24 V
60 W (350 °C) approx. 12 s (280 °C)
50 °C - 450 °C
approx. 50 g
0DIG20A27 DIGITAL 2000 A electronic station complete with
Micro Tool soldering iron 0270BDJ,
with soldering tip 0212BDLF, tool holder 0A42,
and dry sponge with container 0A08MSET
80 W / 230 V, 50 - 60 Hz / 24 V
20 W (350°C) approx. 50 s (280 °C)
150 °C - 450 °C
approx. 25 g
0DIG20A45 DIGITAL 2000 A electronic station complete
with Chip Tool desoldering pincette 0450MDJ,
desoldering tips 0422MD, tool holder 0A43,
and dry sponge with container 0A08MSET
80 W / 230 V, 50 - 60 Hz / 24 V
2 x 20 W (350 °C) subject to tips
150 °C - 450 °C
approx. 75 g
DIG20A64
with Tech Tool soldering iron and ERSA
SENSOTRONIC control system
612 soldering tip series see page 40
Multifunctionality Combined With Comfort
DIG20A27
with Micro Tool soldering iron and ERSA
RESISTRONIC control system
212 soldering tip series see page 42
DIG20A45
with Chip Tool and ERSA RESISTRONIC
control system.
422 desoldering tip series see page 41
X-Tool
with ERSA SENSOTRONIC control
722 desoldering tip series
see page 39
Wide range
of soldering
tips!
Fig. with 0A08MSET
All fi gures with
0A08MSET