Datasheet

4
3
2
1
4
i-Tool Soldering iron: Ultra light (only 30 grams), ultra
short (only 155 mm), and ultra short tip-to-grip (only
45 mm).
ERSA i -CON:
Solving the Industry’s Toughest Hand So ldering Problems
150 W micro heating element: allows
for standard, long-life, low-cost tips to be
removed without replacing the expensive
heating element each time the tip wears
out.
Ultra fastest heat-up and recovery of
all soldering irons that have exchangeable,
low-cost tips: room temperature to 350 °C in
approx. 9 seconds; from stand-by to 350 °C
in approx. 3 seconds.
“One Touch” easy to use operation:
user friendly station software with large,
multifunctional display has on-line Help Text
and easy menu navigator with i-Op control.
Automatic Stand-by Motion Sensor:
recognizes when the iron is being used
and automatically goes into a stand-by
temperature when the iron is put into its
holder.
i-Set Tool: This optional item allows
for automatic download of station
settings and lockout by acting as a
type of USB stick. Simply upload the
station settings from an
i-CON into the
i-Set Tool. The i-Set Tool is then plugged into
any other
i-CON station, and all set parameters
are automatically downloaded in less than
5 seconds, and the station is locked out!
Process Window Alarm: informs
operator with a visual and acoustic signal if
the soldering iron tip gets too hot or too cold.
QC can specify a process window in which
the iron is allowed to work, and for the first
time ever in the history of hand soldering,
it is possible to guarantee that every solder
joint is made with the proper temperature!
i-Tool calibration: Unlike other systems,
the microprocessor which stores the
temperature calibration of the iron is actually
located in the PCB handle. This now allows
for each individual
i-Tool to be calibrated
independent of the soldering station meaning
great time and cost savings. Only the irons
need to be taken for calibration, which is
much easier and faster!
Lead-free i-Tips: The low-cost i-Tips are
specially plated with the new ERSADUR-LF
galvanic process lasting 2 to 3 times longer
than standard tips!
Power level settings: allows for the use of
three different power settings which control the
heating element overshoot depending on the
heat required. Thus, the operator can choose the
right setting for the right job – either more power
or more control! Power level “low” guarantees
NO OVERSHOOT for maximum component
safety!
The fastest, safest programming and locking out of soldering stations for
maximum quality control and documentation!
1. Low-cost i-Tip
(Consumable, easy to change,
long-life)
2. i-Tip fastener
3. Heating element
(stick-on type, long-life)
Safe control is possible when temp sensitive components require NO
OVERSHOOT! - power level “low”!
innovative features of this technology