Datasheet

www.ersa.com
More than 70 ERSA representatives in over
65 countries.
Technical data:
ERSA i-CON & i-CON2 Electronic Station
Supply voltage; frequency:
220 – 240 VAC/50Hz; 110 – 120 VAC/60 Hz (option)
Admissible ambient temperature:
0 °C – 40 °C / 0 – 104 °F
Secondary voltage:
24 V~
Continuous rating:
80 W (120 W with
i-CON2) protection class I (double insulation)
Weight:
2 kg / 4.4 lb
Control technology:
i-Tool: i-TRONIC control with digital PID algorithm and
multiple sensors; X-Tool: SENSOTRONIC control system with
digital PID algorithm;
Chip tool: RESISTRONIC control system
Temperature range:
continuous 150 °C – 450 °C / 300 °F – 842 °F
Display:
blue LCD display
Operation:
one-touch operation by means of a rotary type push button
Supply line:
2 m / 6.5 ft PVC with connector
Antistatic:
antistatic design suitable for operation in an ESD environment.
MIL-SPEC/ESA standard
Non-operative temperature fluctuation:
less than +/-2 °C / +/-36 °F
Tip to ground resistance:
less than 2 Ω
Tip leakage:
less than 2 mVeff, VDE, EMV checked
Fuse rating:
800 mA, slow-blow (1.25 A, slow-blow with
i-CON2)
Connectable soldering and desoldering tools:
i-Tool, Chip tool, X-Tool
ERSA i-Tool soldering iron
Voltage:
24 V~
Maximum heating power:
150 W +/- 10 %
Mean heating power:
80 W
Heating time:
approx. 9 s to 350 °C / 662 °F
Weight (without supply line):
approx. 30 g / 1 oz
Supply line:
1.2 m / 4 ft highly flexible, heat-resistant, antistatic
Antistatic:
antistatic design suitable for operation in an ESD environment.
MIL-SPEC/ESA standard
ERSA Chip tool desoldering pincette
Voltage:
24 V~
Maximum heating power:
PTC 2x30 W / 280 °C / 536 °F; 2x20 W / 350 °C / 662 °F
Heating time:
subject to the desoldering tip
Weight (without supply line):
approx. 75 g / 2.6 oz
Supply line:
1.2 m / 4 ft ultra-flexible, heat-resistant, antistatic
Antistatic:
antistatic design suitable for operation in an ESD environment.
MIL-SPEC/ESA standard
ERSA X-Tool desoldering device
Voltage:
24 V~
Maximum heating power:
2 x 60 W at 350 °C / 662 °F
Heating time:
subject to the desoldering tip
Weight (incl. supply line and tip):
approx. 240 g / 8.5 oz
Heating elements:
2, 60 W each at 350 °C / 662 °F
Temperature measurement:
Ni-CrNi thermocouple
Starting vacuum:
up to 800 mbar
Distance from handle to soldering tip:
approx. 70 mm / 27.6 in
Antistatic:
antistatic design suitable for operation in an ESD environment.
MIL-SPEC/ESA standard
ERSA Vacuum Unit
Voltage / Power:
230 V~, 50-60 Hz, 5 W; 115 V~, 60 Hz, 5 W (option)
Noise level:
approx. 55 db (A)
Weight:
550 g / 19.4 oz
Ultimate vacuum:
approx. 800 mbar
Throughflow:
approx. 4.5 l/min
Antistatic:
antistatic design suitable for operation in an ESD environment.
MIL-SPEC/ESA standard
Learn more under www.ersa-i-tool.com or contact ERSA directly.
128763 - 05/2008 • subject to changes • © by ERSA
Europe (HQ)
ERSA GmbH
Leonhard-Karl-Str. 24
97877 Wertheim / Germany
Phone: [phone] / 800-0
[e-mail]
America
ERSA North America
a division of
KURTZ North America Inc.
1779, Pilgrim Road
Plymouth, WI 53073, USA
Phone: [phone]
[e-mail]
Asia
ERSA Asia Pacific
a division of
KURTZ Far East Ltd.
Suite 3505, 35/F.,
China Resources Building
26 Harbour Road, Wan Chai
Hong Kong
Phone: [phone]
[e-mail]
China
ERSA Shanghai
a division of
KURTZ Shanghai Ltd.
Room 601 Green Land
Business Mansion,
No. 1258, Yu Yuan Rd.
Shanghai 200050, China
Phone: [phone]
[e-mail]