The Revolutionary ERSA i-CON and i-Tool: intelligent and Performing Power for the Ultimate innovation in Hand Soldering ERSA GmbH Soldering Division: Tools & Inspection Systems
ERSA i -Tool: The World’s Most intelligent Professional Soldering Iron Guaranteeing quality in a Lead-Free environment will put the greatest demands on hand soldering applications. How well the iron recovers or puts back the heat lost at the tip, and how long the tip remains on the joint ultimately determines the actual joint temperature. Slow recovering irons will lead to inconsistent joint temperatures.
Highlights: ERSA i-Tool and i-CON Highest Power & Performance: Optimal Ergonomics & Ease of Use: • 150 W micro heating element • Ultra fast heat-up: from 30 °C to 350 °C in approx. 9 sec., Stand-by to 350 °C in approx. 3 sec. • Ultra fast heat recovery time • Ultra short tip-to-grip: 45 mm, Ultra small: 155 mm, ultra light: 30 gr.
ERSA i -CON: Solving the Industry’s Toughest Hand So innovative features of this technology 1 2 150 W micro heating element: allows for standard, long-life, low-cost tips to be removed without replacing the expensive heating element each time the tip wears out. Ultra fastest heat-up and recovery of all soldering irons that have exchangeable, low-cost tips: room temperature to 350 °C in approx. 9 seconds; from stand-by to 350 °C in approx. 3 seconds.
ldering Problems 380° Sensor actually measures tip temperature near solder joint! Solder Tip Temp Process Window iron Tip Temp 150 W Heating element Operator is visually and acoustically alarmed if the tip temperature goes outside of the specified process window Lead Free Solder Joint Process Window New i-Tip for better heat transfer & longer life! The i-Tool recovers so fast that all solder joints can be made with nearly the same temperature.
ERSA i-CON2: Multiple Soldering and Desoldering Tools i-CON2 with i-Tool soldering iron and Chip tool Fig. 0IC2000AC Today’s PCBs are becoming more complex with smaller and more densely compact components. In order to meet these difficult hand soldering touch-up and repair challenges, ERSA continues to be a market leader in supplying special tools for special applications.
for Maximum Flexibility Fig. 0IC2000AXT The X-Tool is an extremely high powered desoldering iron which has been specifically designed for the toughest through-hole desoldering applications on the heaviest of PCBs. Safe lead-free desoldering is much more challenging due to the higher process temperatures and will require a desoldering tool which can function effectively at the lowest possible temperature.
0102PDLF10 0102CDLF24 0102CDLF080C 0102SDLF04 9,5 pencil point, bent, 0.4 mm ø ,7 12 angled face, 1.3 mm ø / 1.5 mm ø 0102BDLF20 pencil point, bent, 1.8 ø 0102WDLF35 45 ° 0102ADLF13 0102ADLF15 1,8 0102SDLF18 0102SDLF08L 0102WDLF16 0102WDLF23 8,6 0102CDLF200 0102CDLF120C 0102CDLF100C 0102SDLF06L 0,8 0102CDLF50 0102CDLF32 0,8 0102CDLF100 0102SDLF06 0102ADLF40 8 5,2 angled face, 4.0 mm ø Ø 0,4 5,2 pencil point, bent, extended, 0.
0422QD2 0422SD* 0722EN0615S nickel-plated, ID 1.2 mm, OD 2.3 mm nickel-plated, ID 1.5 mm, OD 2.9 mm nickel-plated, ID 0.6 mm, OD 1.5 mm * Recommanded for use with IRHP 200 9 nickel-plated, ID 1.0 mm, OD 1.8 mm 722 Tip Series – X-Tool 0722EN0818 nickel-plated, ID 0.8 mm, OD 1.8 mm 0722EN1529 0722EN1223 0722EN1023 0722EN2348 nickel-plated, ID 2.3 mm, OD 4.8 mm for MICROMELF ERSADUR, ID 1.5 mm, OD 2.9 mm nickel-plated, ID 1.0 mm, OD 2.
Special Care for ERSADUR Long-Life Soldering Tips Hand soldering operators are happy when their soldering tips last a long time and continue to solder well. Soldering tips that do not allow the solder to melt rapidly due to excess oxidation clearly disrupt productivity! Lead-free soldering requires special care of the soldering tips in order to solder efficiently. The ERSA Tip-Reactivator allows the regeneration of oxidized soldering tips.
ERSA i-CON & i-CON2: Different Models 0IC1000A ERSA i-CON with i-Tool 0IC1000A Electronically temperature-controlled soldering station, antistatic, complete consisting of: 0IC1000AC 0IC103A Electronic station, 220 - 240 VAC / 50 Hz, 80 W 0100CDJ i-Tool soldering iron with tip 0102CDLF16, 24 V, 150 W max.
Technical data: ERSA i-CON & i-CON2 Electronic Station Supply voltage; frequency: 220 – 240 VAC/50Hz; 110 – 120 VAC/60 Hz (option) Admissible ambient temperature: 0 °C – 40 °C / 0 – 104 °F Secondary voltage: 24 V~ Continuous rating: 80 W (120 W with i-CON2) protection class I (double insulation) 2 kg / 4.
