Datasheet

i-CON soldering/desoldering stations
Ersa Double channel soldering and desoldering station
i-CON 2V – a plus in flexibility for professionals
The double channel soldering and desoldering station i-CON
2V is a consistent further development of the well-known i-
CON 2 based on the future oriented Ersa VARIO-platform.
In addition to the present soldering and desoldering tools,
the station can also drive the SMD-desoldering tweezers
CHIP TOOL VARIO (2 x 40 W) and the PTH desoldering iron X-
TOOL VARIO (150W). The station utilizes an intelligent power
management to shift dynamically its 120 W power between
the attached tools. The i-CON 2V, like all other i-CON sta-
tions, convinces by its intuitive One-Touch operation and the
large multi-functional display. The station accomplishes the
EPA requirements and is available in a version with interface
to connect a fume extraction unit, a heating plate and a PC.
If required the i-CON 2V can be updated like the i-CON VARIO
stations with a microSD memory card and thus is prepared
for future necessities.
PTC
Order no. Description Rating/
voltage
Heating time Temperature
range
Weight
(w/o cable )
0IC2200V
1IC2200V00A67
Double channel soldering and desoldering station i-CON 2V,
complete, with i-TOOL soldering iron 0100CDJ
with soldering tip 0102CDLF16
and holder 0A52, complete
150 W/230 V, 50 Hz
150 W
150 W/115 V, 50 Hz
approx. 9 s (350 °C)
150 °C – 450 °C
approx. 30 g
0IC2200VC
1IC2200VC0A67
Double channel soldering and desoldering station i-CON 2V,
complete, with i-TOOL soldering iron 0100CDJ
with soldering tip 0102CDLF16
CHIP TOOL VARIO desoldering tweezers (0460MDJ) with tips
0462MDLF007, holders 0A52 and 0A54, complete
150 W/230 V, 50 Hz
150 W
2 x 20 W (350 °C)
150 W/115 V, 50 Hz
approx. 9 s (350 °C)
subject to tips
150 °C – 450 °C
approx. 30 g
approx. 75 g
0IC2200VIT
1IC2200VITA67
Double channel soldering and desoldering station i-CON 2V,
with 2 i-TOOL soldering irons 0100CDJ
with soldering tip 0102CDLF16,
and 2 holders 0A52, complete
150 W/230 V, 50 Hz
150 W
150 W/115 V, 50 Hz
approx. 9 s (350 °C)
150 °C – 450 °C
approx. 30 g
0IC2200VXT
1IC2200VXTA67
Double channel soldering and desoldering station i-CON 2V,
complete,
with vacuum unit 0CU103A
i-TOOL soldering iron 0100CDJ with tip 0102CDLF16,
X-TOOL VARIO desoldering iron 0740EDJ with tip 0742ED1225,
and holders 0A52 and 0A56, complete
150 W/230 V, 50 Hz
45 W
150 W
150 W
150 W/115 V, 50 Hz
approx. 9 s (350 °C)
subject to application
150 °C – 450 °C
approx. 30 g
approx. 240 g
0IC2200VOC
1IC2200V0CA67
Double channel soldering and desoldering station i-CON 2V,
complete,
with interface
i-TOOL soldering iron 0100CDJ with tip 0102CDLF16,
and holder 0A52, complete
150 W/230 V, 50 Hz
150 W
150 W/115 V, 50 Hz
approx. 9 s (350 °C)
150 °C – 450 °C
approx. 30 g
CHIP TOOL VARIO
CHIP TOOL VARIO desoldering tweezers
Desoldering tip pairs of the series 462 see page 44
X-TOOL VARIO
powerful desoldering iron for safe desoldering of
heat-sensitive through-hole components
Desoldering tip series 742 see page 48
21