User manual

Take PTZ-Control*
To control the PTZ functions on a camera present on the monitor selected by this keyboard:
Take control*
Warning*: The MON key should not be used in connection with cameras connected to the
VST 10CA, since monitor operation is disabled while controlling Adpro equipment. Cameras
connected to the VST 10CA can be PTZ-operated when displayed without further key strokes.
Zoom
Change the focal length:
1500M/1502M 1501M/1503M 1500M/1502M 1501M/1503M
Zoom wide Zoom narrow
Focus
If the picture on the selected monitor is not in focus, press:
Focus near Focus far
NOTE: When controlling an Integrated Camera Unit (ICU), pressing
one of the focus keys will switch the ICU into manual focus mode.
Iris
If the picture on the monitor is too dark or light, press:
Iris open Iris close
NOTE: When controlling an Integrated Camera Unit (ICU), pressing
one of the iris keys will switch the ICU into manual iris mode.
User Manual for SYSTEM 500M
Number 2822-00025 GB - Page 9