User manual

F1 F2 F3
F4 F5 F6
F7 F8 F9
F10 F11
MENU
The F1 and F2 keys can be used to control a relay or open collector output directly,
if programmed to do so.
The MENU key calls the main programming menu and can be used to exit the setup
system while saving any programming changes made.
If Adpro equipment currently is being controlled the MENU key will call the setup
menu on the Adpro equipment being controlled. This function corresponds to
activate the Adpro function key "END".
AUX
AUX
The AUX ON and AUX OFF keys are used to control the corresponding auxiliary
relays 1-6 in the camera stations Series BDR-500. If the auxiliary relay 3 in the
camera station currently being controlled should be activated, press the numerical
key "3", and immediately after the key "AUX ON".
The AUX keys are intended for user selected functions. The AUX functions are
typically used for control of light, washer, wiper and gates.
VCR
1
VCR
2
The VCR1 and VCR2 keys can be used to control a relay or open collector output
directly, if programmed to do so.
These outputs are typically used to manually control a video cassette recorder, since
the same outputs can be activated automatically in alarm situations, if programmed
to do so.
The MACRO key is together with the numerical keys used to play back a macro. If
macro number 45 should be played back, press the numerical keys "4""5", and
immediately after the key "MACRO".
The SITE key is used to select a site. If site No. 2 is to be selected, press the
numerical key "2", and immediately after the key "SITE".
Note: The site selection feature is available from keyboards connected to the
ARC-net only.
The BACK LIGHT COMPENSATION key is used in connexion with the ICU to
enable/disable the cameras Back light compensation.
SHIFT
The SHIFT key is used in combination with the 'DELETE' and 'INSERT' keys, refer to
the Camera Station manual for more information.
DEL
The DELETE key is used to delete prepositions from the preposition stack, refer to
the Camera Station manual for more information.
Only used in combination with Ernitec preposition Camera Stations.
INS
The INSERT key is used to insert prepositions in the preposition stack, refer to the
Camera Station manual for more information.
Only used in combination with Ernitec preposition Camera Stations.
ADPRO
The ADPRO key is used in order to give control over the Adpro equipment
associated or connected with the selected camera. Pressing the ADPRO key makes it
possible to control the associated Adpro equipment.
Pressing the key a second time will disable control to the Adpro equipment.
The ADPRO key is in combination with the ESC key used to enter the operator
LEVEL1 or LEVEL 2 passwords: Pressing the ESC key immediately followed by the
ADPRO key will allow the operator to enter the required password. For further
information, refer to the specific section later in this manual.
User Manual for SYSTEM 500M
GB - Page 6 Number 2822-00025