Manualshelf

User manual

ManualsBrandsERNITEC ManualsComputer equipment1502M
12345678910
A
The DISPLAY TEXT key is used to remove or insert text displayed by the selected
Camera Station. Pressing the key ones removes text. Pressing the key again inserts
the text. This function can only be used if BDR-55X Camera Stations are used.
The arrow keys are used for manual control of a pan and tilt unit.
Only available for cameras controlled by Ernitec Camera Stations.
The key combination ESC
+ ↑/↓ is used in connexion with the Adpro VST 10CA to
make CHANNEL UP/DOWN selections.
The key combination ESC
+ ←/→ is used in connexion with the Adpro VST 10CA to
make DISPLAY LEFT/RIGHT selections.
The PREPOSITION key is used together with the numeric keys, in order to call a
preposition. If preposition number 45 should called, press the numerical keys
"4""5", and immediately after the key "PREPOSITION". Pressing the ESC key
immediately followed by the PREPOSITION key is used to save a preposition to the
number entered in front of this key combination.
These functions can only be used if ERNITEC Preposition Camera Stations, are
connected.
AUTO
The AUTO key is used together with the focus/iris keys to switch the ICU back into
Auto Focus, and/or Auto Iris
The two ZOOM keys are used to change the focal length of the lens, and
consequential the view angle of the camera.
Only available for cameras controlled by Ernitec Camera Stations.
The two FOCUS keys are used to bring into focus the part of the scene observed.
Only available for cameras controlled by Ernitec Camera Stations.
ICU: When pressed the ICU enters manual focus mode
The IRIS keys are used to adjust the iris opening, to compensate for varying light
conditions on the scene observed.
Only available for cameras controlled by Ernitec Camera Stations.
ICU: When pressed the ICU enters manual iris mode
1
2
3
4 5 6
The six AUX keys are intended for user selected functions. The AUX functions are
typically used for control of light, washer, wiper and gates.
Only available for cameras controlled by Ernitec Camera Stations.
User Manual for SYSTEM 500M
Number 2822-00025 GB - Page 5