User manual

Keyboard types
Five different keyboard types can be used to control the SYSTEM 500M:
Keyboard 1500M: Arrow keys for Pan/Tilt, no display, one shared RS232/RS485 port, no
Adpro control keys, no ICU control keys
Keyboard 1501M: Joystick for Pan/Tilt, no display, one shared RS232/RS485 port, no
Adpro control keys, ICU control keys, possibility for direct ICU/Camera Station control.
Keyboard 1502M: Arrow keys for Pan/Tilt, display, one shared RS232/RS485 port, ARC
NET port, Adpro control keys, ICU control keys, macro recording, possibility for direct
ICU/Camera Station control.
Keyboard 1503M: Joystick for Pan/Tilt, display, one shared RS232/RS485 port, ARC NET
port, Adpro control keys, ICU control keys, macro recording, possibility for direct
ICU/Camera Station control.
Front panel keyboard: This is the internal keyboard of the SYSTEM 500M, it has arrow
keys for Pan/Tilt, no Adpro control keys, no ICU control keys.
See page 25 and 27 for keyboard layouts
Legends Used
When two keys are used in a combination, i.e. typically the ESC key and another key, the first
key is depressed and released again before the second key is depressed. The second key should
be activated within approximately 2 seconds after the first key is released. This procedure is
basically equal to the normal key strokes when selecting cameras etc.
This method is illustrated by using an "" sign between the two keys, refer to the example
below:
ESC
ð
Set the time and date
User Manual for SYSTEM 500M
Number 2822-00025 GB - Page 3