User manual

Error Messages
The SYSTEM 500M and/or the keyboards are able to display text messages for user guidance
only and as error messages.
Note: Certain error messages are displayed on monitor 1 only e.g. when downloading new
settings from the SYSTEM 500M Set-up program. It is therefore recommended to have a
camera displayed on the monitor 1 constantly.
ALARM OUT OF RANGE
The alarms are received on a serial RS-232 port from an external source according to the
Ernitec alarm protocol.
The actual alarm number received is invalid, valid range is 001-032
AUX # ON
Auxiliary function # has been activated.
AUX # OFF
Auxiliary function # has been de-activated.
AUX # OUT OF RANGE
The operator has on the keyboard entered an invalid AUX number - valid range is 1-6.
CAMERA ID NOT FOUND
An operator has tried to select a camera with an ID-number, which doesn't exist.
CAMERA IS FIXED
An operator has tried to PTZ-operate a camera, which in the matrix set-up is programmed as a
fixed camera.
CAMERA NOT VALID
An operator has tried to select a camera from a keyboard which is not allowed to access the
camera or has tried to display it on a monitor which is not allowed to display it.
INVALID KEY
The key the operator has pressed is programmed invalid for the current keyboard.
INVALID PREPOSITION
The entered preposition number is out of range, valid range is 1-128
User Manual for SYSTEM 500M
Number 2822-00025 GB - Page 21