User manual
Operation of Adpro equipment
The Adpro operating functions can only be accessed when the LEVEL 1 password is known
by the operator. In order to set-up the Adpro equipment the LEVEL 2 password is needed.
Note: The Adpro equipment can only be operated using 1502M/1503M keyboards.
Setting the Keyboard Access Level
In order to enter the Keyboard Access Level menu, press:
ESC
ðð
ADPRO
=
KEYBOARD
ACCESS LEVEL
PASSWORD (4 DIGIT):
*
PRESS (CLR) TO ENTER
LEVEL 0
Set the keyboard Access level.
Press the MON key to activate the field,
and enter the password.
Terminate with the MON key again.
Press the CLR key to enter LEVEL 0 i.e. no
Adpro operation possible.
Take Adpro control
To control the Adpro functions on the camera currently present on the monitor selected by this
keyboard:
ADPRO
Take Adpro control
Adpro functions
The available Adpro functions are briefly described in the Key Functions section located
previously in this manual.
For a deeper description of the individual Adpro functions please refer to the Operation
section in the relevant Adpro Manuals.
Programming the Adpro equipment
During Adpro control mode press the MENU-key to enter the set-up system on the Adpro
equipment currently being controlled. Note, that this function requires that the keyboard has
access to LEVEL 2 functions.
For programming, please refer to the SETUP section of the relevant Adpro manual.
User Manual for SYSTEM 500M
GB - Page 18 Number 2822-00025