User manual

Alarm Zones
From this sub-menu it is possible to enable/disable Alarm Zones:
ðð
=
ALARM ZONE STATUS
1: *ENABLED
2: ENABLED
3: ENABLED
4: ENABLED
5: ENABLED
6: ENABLED
7: ENABLED
8: ENABLED
Move Cursor to
ALARM ZONES,
using arrow keys,
or joystick.
Press MON to
call ALARM
ZONES menu
Use the TILT UP or TILT DOWN keys, or
JOYSTICK, to position the cursor on an
Alarm Zone, and press the MON key to
open the field. Use the PAN LEFT/RIGHT
keys, to select between Enabled and
Disabled, and press MON to close the
field and accept your selection.
Alarm Input
From this sub-menu it is possible to select whether the alarm inputs should be handled locally,
or send to a MAIN System:
ðð
= ALARM INPUT
ALARM INPUT IS:
*HANDLE LOCAL
PRESS (ESC) TO QUIT
Move Cursor to
ALARM INPUT,
using arrow keys,
or Joystick
Press MON to
call ALARM
INPUT menu
Press MON to open the field. Use the PAN
LEFT/RIGHT keys, or JOYSTICK, to select
between Handled Locally and Send To
MAIN, and press MON to close the field
and accept your selection.
User Manual for SYSTEM 500M
Number 2822-00025 GB - Page 17