User manual

Change Dwell Time
To change the Dwell Time for sequence number 8:
ESC
ðð
=
START SEQUENCE
SEQ ID: 000
DWELL TIME
FACTOR: 00
(ESC) TO START SEQ
Call Dwell Time set-up
The default factor is 10, meaning that the
sequences will be running with the
specified dwell times; with the dwell time
factor set to 5 the dwell times will be
halved or, in other words, the sequence
will be executed at double speed.
Minimum factor is 3.
Use the TILT UP or TILT DOWN keys to
find the SEQ ID entry. Press the MONITOR
key, enter the sequence ID and press the
MONITOR key. Move down to the
FACTOR field and press the MONITOR key.
Enter the new factor and press the
MONITOR key. Press the ESC key to start
the sequence.
User Manual for SYSTEM 500M
GB - Page 14 Number 2822-00025