Installation manual

Operation of telemetry receivers

This section will describe operation telemetry receivers diretly from the Series 1500 keyboard

when mode of operation is set to Camera Control. For operation of the SYSTEM 500M or

1000M, refer to the SYSTEM 500M/1000M User Manual.

Select Camera

If Camera 3 is to be controlled:

ðð

Select camera number 3

All subsequent operations are now directed to camera 3 (=address 2) until

a new camera is selected.

Select all cameras (broadcast)

If all cameras should be operated simulteneously, press:

Broadcast commands

Warning: When e.g. activating the pan functions all cameras will pan! The broadcast function

should therefore be used with care!

Zoom

Change the focal length:

1500M/1502M 1501M/1503M 1500M/1502M 1501M/1503M

Zoom wide Zoom narrow

Focus

If the picture on the selected monitor is not in focus, press:

Focus near Focus far

Installation and Setup instruction for Keyboard Series 1500

Page 11