Datasheet

12 Catalog E 074473 12/08 Edition 7 www.erni.com
1.27 mm Connectors SMC
Electrical and Mechanical Characteristics
E 84703E 84703UL
Product-approval
no flame-retardent additives, no toxic additives allows easy recyclingRecycling
Environment compatibility
4-6 µm Sn over 2-3 µm Ni4-6 µm Sn over 2-3 µm NiPlating
Cu alloyCu alloyBase material
Clip Materials
IDC termination area:
0.5-2 µm Sn over 2-3 µm Ni
SMT termination area:
4-6 µm Sn over 2-3 µm Ni
4-6 µm Sn (SMT)
0.5-2 µm Sn (pressfit)
over 2-3 µm Ni
Termination area
-min. 1.0 µm PdNi + 0.1 µm Au
over 2-3 µm Ni
Mating area
Cu alloyCu alloyBase material
Contact Materials
E 83005E 83005
UL file
UL 94 V-0UL 94 V-0UL flame rating
CTI 175CTI 175IEC 112CTI value
LCPLCPPlastic material
Housing Materials
< 0.1 mm< 0.1 mmCoplanarity
0/55 °C0/55 °CProcessing temperature
(IDC connection)
-soldering of pressfit connectors
not to be recommended
Warning
20 - 40 s at 260 °C20 - 40 s at 260 °CJEDEC
J-STD-020C
Reflow soldering
temperature max.
10 s at 260 °C 10 s at 260 °C Dip soldering
temperature max.
3.5 s at 350 °C 3.5 s at 350 °C Hand soldering
temperature max.
IEC 68-2-20
Solder temperature max.
Process-conditions
12, 26, 5012, 26, 50, 68, 80Number of Pins
Board-on with AWG30
flat ribbon cable 250 mm
Type B, Type Q and
IDC Assemblies
Standard