Datasheet

Catalog E 074521 02/08 Edition 8 www.erni.com 5
MicroStac
®
- 0.8 mm Mezzanine Connector System
Electrical and Mechanical Characteristics
3 mm Stacking Height :
max. 4 N per contact
5 mm Stacking Height :
max. 2 N per contact
IEC 60512
test 13b
Insertion and withdrawal
force
< 10 mating cycles
IEC 60512
test 9a
Mechanical operation
(mating cycles)
< 1 µs
IEC 60512
test 2e
Contact disturbance
(while shock test)
50 g
11 ms
IEC 60512
test 6c
Shock, halfsine
< 1 µs
IEC 60512
test 2e
Contact disturbance
(while vibration test)
10 – 2000 Hz
20 g
IEC 60512
test 6d
Vibration, sine
> 10
4
MΩ
IEC 60512
test 3a
Insulation resistance
< 10 mΩ
IEC 60512
test 2a
Contact resistance
contact – contact 500 V
rms
IEC 60512 Dielectric strength
The permissible operating voltages depends on the customer
application and on the applicable or specified safety require-
ments.Insulation coordination according to IEC 60664-1 has
to be regarded for the complete electrical device. Therefore,
the maximum creepage and clearance distances of the mated
connectors are specified for consideration as a part of the
whole current path. In practice, reductions in creepage or
clearance distances may occur due to the conductive pattern
of the printed board or the wiring used, and have to be taken
into account separately. As a result the creepage and clea-
rance distances for the application may be reduced compared
to those of the connector.
IEC 60664Voltage rating
0.4 mm
Air – and creepage distance
50 pin version:
1.6 A @ 20°C
1.3 A @ 70°C
0.8 A @ 100°C
Current rating per contact
-55/125 °C
Temperature range
-55/125/21
DIN EN 60068-1
test b
Climate Category
Technical data
6, 9, 12, 14, 50
Number of Pins
1 Row and 2 Row VersionsStandard