Datasheet

Catalog E 074595 09/11 Edition 2 www.erni.com 3
IDG-B Enclosures
Termination Options
Top part for use with screw terminal blocks (5 mm / 5.08 mm pitch)
Top part for use with pluggable screw terminal blocks (5 mm / 5.08 mm pitch)
Closed top part for use without terminal blocks
This enclosure version has been desgined for use with standard pluggable
screw terminal blocks from different suppliers. The pluggable screw terminal
blocks are avoiding failures while termination or in case of service (replacement
of module). A pluggable system allows also pre-wiring of cabinets.
Maximum number of terminals
IDG-B2:10(5oneachside)
IDG-B4:24(12oneachside)
IDG-B6:36(18oneachside)
IDG-B9:52(26oneachside)
The using of terminal blocks is not possible with the closed top part.
Inadditionthereareoptionsconcerningallkindoftoppartsforcustomized
cut-outs made in the top area for connectors like D-Subs or other parts like
LEDs, rotary switches, fuse holders and so on.
This enclosure version is designed for use with standard terminal blocks from
different suppliers.
The discrete wires can be terminated or disconnected to the terminal blocks
due to an oval cut-out tin the top part.
Maximumnumberofterminals:
IDG-B2:10(5oneachside)
IDG-B4:24(12oneachside)
IDG-B6:36(18oneachside)
IDG-B9:52(26oneachside)