Operation Manual

EKWR 5 A1

Installation

1. Place the scale on a ﬂat and stable surface.

2. Remove the two screws  from the cradle  using a spanner and a

screwdriver.

3. Place the cradle  on the weighing mechanism so that the holes for the

screws  are arranged one above the other and the bent arms of the

cradle  are pointing upwards.

4. Push the screws  through the holes in the cradle  and screw the nuts 

onto them from below (see fold-out page).

5. Place the weighing bowl  onto the cradle .

NOTE

► The appliance may only be used when fully assembled.

Weighing food

CAUTION – PROPERTY DAMAGE!

► Do not load the scale with more than 5 kg. The scale could be irreparably

damaged.

1. If you have not done this already: place the weighing bowl  on the

cradle .

2. Turn the zero setting wheel  until the pointer  points to zero.

3. Place the food in the weighing bowl .

The pointer  shows the weight on the scale .

– Read the outer digits on the scale  for the weight in kilograms/grams.

– Read the inner digits on the scale  for the weight in pounds (lb)/

ounces (oz).