Installation Instructions

In-use Port EP-RJ45 Installation
• Close the lid of the EP-RJ45 around the in-use network cable.
• Push the EP-RJ45 device all the way forward towards the RJ45 port. You
will hear a series of clicks as it locks on the the port.
Page 4
Unused Port EP-RJ45 Installation
• Insert the Unused port lock into the RJ45 port.
• Close the lid of the EP-RJ45 and install the EP-RJ45 device onto the
Unused port lock. You will hear a series of clicks as it locks onto the port.
Page 5