Brochure

TAC Erie’s motorized hydronic
valves, the PopTop
™, provide
convenient, reliable and easy
installation for a variety of
heating and cooling applications.
Installation is a snap with
easy, one-handed removal or
engagement of the actuator to
the valve body. Push the button
and lift. It’s that simple.
Features:
• One-handed engagement
or removal of the motorized
actuator to the valve body.
• Valve actuator can be easily
attached after the valve body
has been installed into the
system.
• Mounts quickly and easily
without the need of linkages or
calibration.
• Available in 2-way and 3-way
port confi gurations, 1/2”
(15mm) through 1-1/4” (32mm)
sweat or 1/2” (15mm) to 1”
(30mm) threaded connections,
1.0 to 8.0 Cv range.
• Available factory coupled, or as
individual bodies and actuators.
• Direct replacement for all
existing PopTop™ applications.
• Rugged 300 PSIG rated brass
forged body design for long life.
• UL listed actuator.
TAC Erie
Family of Products
POPTOP™ ZONE VALVES
• 1/2”. 3/4”, 1” and 1-1/4” Sweat, NPT
and Inverted Flare Union.
• Two-position (on/off), 2-way and 3-way.
• General close-off or High close-off.
• Low voltage or line voltage.
POPTOP™ MODULATING VALVES
• 1/2”, 3/4”, and 1-1/4” Sweat, NPT.
• Three-wire (on/off), 2-way and 3-way.
• 0-10, 0-5, 5-10 VDC or 4-20 mA proportional inputs.
• Spring return or non-spring return.
• Time out feature available.
DAMPER ACTUATORS
• Direct and linkage drive.
• Spring return or motor driven open and closed.
• 2-wire or 3-wire control with end switch.
• Clockwise or counter-clockwise rotation.
BOILER BOSS
• Single and multiple zone circular, zone valve
and hydronic heating/cooling air handlers.
• LED readouts and status indicators.
• Priority Plus
® and low-limit protection.
THERMOSTATS AND CONTROLLERS
• Heating and cooling, low and line voltage outputs.
• Digital display or dial control.
• Three-wire fl oating, modulating output.
• 0-10 VDC or 4-20 mA proportional outputs.
2