Installation Guide

8. All information in these instructions is based on the latest product information

available at the time of publication. Eridanus reserves the right to make revisions to

the design of products without notice.

9. Use proper securing hardware and techniques to ensure the support frame will

bear a minimum of 300 lbs (136 kg).

10. Due to differing demands and purposes for usage possible, a template will not

be provided for this model.

Installation Procedures

H=Top of Cabinet to Top Doors

STEP I. Base Cabinet Preparation

Measure the actual size of the sink;

make sure the distance from the top of

the cabinet to the top of the cabinet

doors(dimension H) is greater than the

apron height.

NOTE The cabinet opening should

equal the maximum sink dimensions to

ensure a minimum gap between the sink

and the cabinet.

Apply painter’s tape to the cabinet to

mark cuts and to protect the cabinet

surfaces from any potential damage

when cutting.

Cut the cabinet along the traced lines to

create an opening that will allow the sink

to slide in.

NOTE It's highly suggested the cabinet

be cut after receiving the actual sink. If

the sink is not available at the time of

cabinet preparation, make allowances

to add cabinet filler strips to the opening

after the frame and before the sink is

installed.

Outline for Apron Front

Sink Cutout

Apron

Installation Guide