User`s guide
MBR W40 – Admin’s Manual
93
To access the Diagnostics screen:
In the Maintenance menu, select the Diagnostics, or click the Diagnostics icon in the Advanced screen.
Figure 125: Maintenance – Diagnostics screen
To diagnose network connectivity:
1. Under the Ping section, enter the IP address or URL to be tested in the Destination field.
2. Enter the number of pings you would like to run.
3. Click Go. In a few moments, diagnostic statistics will be displayed. If no new information is displayed, click
Refresh.
The Address Resolution Protocol (ARP) test is used to query the physical address (MAC) of a host.
To run the ARP test:
1. In the Destination field, enter the IP address of the target host.
2. Click Go. In a few moments, diagnostic statistics will be displayed. If no new information is displayed, click
Refresh.
To run a trace-route test:
1. Under the Traceroute section, enter the IP address or URL to be tested in the Destination field.
2. Click Go. The traceroute test begins, constantly refreshing the screen.
3. To stop the test and view the results, click Cancel.
3.8.4.6 User Passwords
The User passwords screen shows existing W40 Web access users accounts and can assist you to change their Web
login passwords.
Note: Account with User permission can change a password for ‘user’ account only