User`s guide

MBR W40 – Admin’s Manual
91
3.8.4 Maintenance
3.8.4.1 Configuration File
W40 enables you to view, save and load its configuration file in order to backup and restore your current
configuration.
Access this feature either from the Maintenance tab under the System screen, or by clicking its icon in the Advanced
screen. The Configuration File screen appears (see Figure 121 ), displaying the complete contents of the W40
configuration file.
Figure 121: Configuration File
Click the Upload Configuration File button to restore your configuration from a file and restart W40.
Click the Download Configuration File button to back up your current configuration to a file.
Note: Upon Restart, W40 restores the settings from its configuration file. However, if Restart attempts fail three times
consecutively, W40 will reset the configuration file by restoring factory defaults before attempting to Restart again.
3.8.4.2 Restart
To restart W40:
1. Access this feature either from the Maintenance tab under the System screen, or by clicking its icon in the
Advanced screen. The Restart screen appears:
Figure 122: Restart
2. Click OK to restart W40. This may take up to one minute.
3. To re-enter the WBM after restarting the gateway, click the browser’s Refresh button.
3.8.4.3 Restore Factory Default Settings
Restoring W40 default factory settings removes all of the configuration changes made to MBR. This is useful, for
example, when you wish to build a new network from the beginning or when you cannot recall changes made to the
network and wish to go back to the default configuration.
 To restore the factory settings:
1. Access this feature either from the Maintenance menu item under the System tab or by clicking its icon in
the Advanced screen. The Restore Defaults screen appears.