User`s guide

MBR W40 – Admin’s Manual
87
3.8.2 Routing
Access W40 routing settings by clicking the Routing menu item under the System tab or by clicking the Routing icon in
the Advanced screen. The Routing screen appears in its basic view.
Figure 3116: Routing – Basic View
3.8.2.1 Routing Table
You can add, edit and delete routing rules from the routing table in the manner described in section 3.3 To add a
routing rule, click the New Route link or the action icon. The Route Settings screen appears.
Figure 117: Route Settings
When adding a routing rule, specify the following:
Name Select the network device.
Destination Enter the destination host, subnet address, network address, or default route. The destination for a
default route is 0.0.0.0.
Netmask The network mask is used in conjunction with the destination to determine when a route is used.
Gateway Enter the gateways IP address.
Metric A measurement of a routes preference. Typically, the lowest metric is the most preferred route. If multiple
routes have the same metric value, the default route will be the first in the order of appearance.