User`s guide

MBR W40 – Admin’s Manual
69
7. Click OK to save the settings. The new IP addresses are displayed in the NAT IP Addresses Pool section.
Figure 88: NAT IP Addresses
8. Click OK to save the settings.
You can now add NAT/NAPT rules based on these IP addresses.
 To add a NAT/NAPT rule:
1. Click the New Entry link in the NAT/NAPT Rule Sets section. The Add NAT/NAPT Rule screen appears.
Figure 89: Add NAT/NAPT Rule
2. Follow the example to create the required NAT/NAPT rules.