User`s guide

MBR W40 – Admin’s Manual
63
10. Similar to the trigger ports screen, select UDP as the protocol, leave the source port at "Any", and enter a
3333 as the single destination port (see Figure 75).
Figure 75: Edit Service Opened Ports
11. Click OK to save the settings.
You can disable a port triggering rule without having to remove it from the Port Triggering screen. To temporarily
disable a rule, clear the check box next to the service name. To reinstate it at a later time, simply reselect the check
box. To remove a rule, click the action icon for the service. The service will be permanently removed.
Note: There may be a few default port triggering rules listed when you first access the port triggering screen. Please
note that disabling these rules may result in non-existent gateway functionality.