User`s guide

MBR W40 – Admin’s Manual
58
Figure 65: Port Forwarding
2. Click the New Entry link. The Add Port Forwarding Rule screen appears.
Figure 66: Add Port Forwarding Rule
3. Select the Specify Public IP Address check box if you would like to apply this rule on the W40 non-default IP
address defined in the NAT screen (refer to Section 3.7.3.8 ). The screen refreshes.
Figure 67: Specify Public IP Address
4. Enter the additional external IP address in the Public IP Address field.
5. The Local Host drop-down menu lists your available LAN computers. Select a computer that will provide the
service (the "server"). If you want to add a new computer, select the User Defined option in the drop-down
menu. This will initiate a sequence that will add a new Network Object that represents the new host. Refer to
section Error! Reference source not found. to learn how to do this. Note that unless an additional external IP
address has been added, only one LAN computer can be assigned to provide a specific service or application.
6. The Protocol drop-down menu lets you select or specify the type of protocol that will be used. Selecting the
Show All Services option expands the list of available protocols. Select a protocol or add a new one using the
User Defined option. This will initiate a sequence that will add a new Service, representing the protocol.
Refer to section Error! Reference source not found. order to learn how to do so.