User`s guide

MBR W40 – Admin’s Manual
56
If you want to add a new address, select User Defined. Add a new Network Object to represent the new host,
as explained in section Error! Reference source not found..
4. Under Protocol, select the type of protocol to use.
To expand the list of available protocols, select Show All Services.
To add a new protocol, select User Defined. Add a new Service to represent the protocol, as explained in
section Error! Reference source not found..
Note: When Web Filtering is enabled, HTTP services cannot be blocked.
5. To display the following message to the client: “Access Denied – this computer is not allowed to surf the
WAN. Please contact your admin,” select Reply an HTML page to the blocked client. When this option is
cleared, the client's packets are simply ignored and no notification is issued.
6. Under Schedule, select a schedule rule that defines the time period during which the access-control rule is to
be applied. To define a new schedule rule go to System->Object and Rules->Scheduler Rules and then follow
the instructions in section Error! Reference source not found..
7. Click OK. The Access Control screen displays a list of all the rules that are currently defined, including the rule
you added.
Figure 63: Firewall - Access Control Rules
Once an access-control rule has been defined, you can edit it as necessary.
 To modify an access-control entry:
1. In the Access Control screen, click the action icon of the rule. The Edit Access Control Rule screen
appears (see Figure 64).
Figure 64: Edit Access Control Rule
2. Edit the parameters as necessary.
3. Click the OK button to save your changes and return to the Access Control screen.