User`s guide

MBR W40 – Admin’s Manual

 To define a hunt group:

1. In the main IP-PBX screen (Services  Voice), click the Hunt Groups tab. The Hunt Groups screen appears.

Figure 57: Hunt Groups screen

2. Click the New Hunt Group link to create new hunt group. The Hunt Group Parameters screen appears.

Figure 58: Hunt Group Parameters Screen

3. Set the parameters as follows:

Parameter

Description

Name

Specify a name for the hunt group.

Ring Mode

Select whether to ring all extensions at once when a call arrives,

(where the first extension that answers, accepts the call), or to ring

one extension at a time. Selecting the second choice will refresh the

screen.

Extensions to Ring

Select the extensions to include in this hunt group. The drop-down

menu displays all available extensions. Note that this step is

mandatory; otherwise the hunt group is empty.

If you chose to ring one extension at a time as your ring mode, by

default the ring will be routed between the extensions in their order

of appearance in this table. When adding multiple extensions, the

and action icons appear. Use these icons to move the

selected extension up or down in the list. If you chose simultaneous

ringing, the order of extensions is not relevant.