User`s guide

MBR W40 – Admin’s Manual
49
Figure 54: CDR screen
The box at the top of the screen provides the following information about the list of calls that appears in the table
below it.
Total Calls
The total number of calls released during the specified time period (see
Start time/End time below).
Start time / End time
Specify the time period to include in the CDR report.
Number of last calls to
display
Specify the maximum number of report lines to display on the screen.
CDR Files
After the CDR report is generated, the report files appear on this line. The
number of files depends on the report size and the time period covered
by the report.
Prev Page/Next Page
buttons
If the report is longer than one page, use these buttons to navigate
between the pages.
Update button
Click this button to refresh the CDR report presentation.
Create Report button
Click this button to start generating the report. When this button is
clicked, the report files are listed on the CDR Files line.
Reset Report button
Click this button to renew the report in the system.
The CDR table includes the following fields:
Number
The number of the telephony events in the list.
From
The Caller ID of the call – the number from which it originated. This number
may be a registered extension number, an external cellular subscriber
number, or a VoIP line number. Note that if a Caller ID is not detected, No
Number will appear in this field.
To
The destination number of the call.
Start Time
The start date and time of the call, in YYYY – MM – YY HH:MM:SS format.
End Time
The end date and time of the call, in YYYY – MM – YY HH:MM:SS format.
Call Duration
The specific call duration.
Status
The final status of the call. Possible values: Answered, No Answer, Failed.