User`s guide

MBR W40 – Admin’s Manual

 To configure cellular related parameters:

1. Information about the cellular related parameters appears in the Cellular Lines section of the screen (Figure

44). The Status column indicates the status of each cellular channel, cellular operator identification

information, and its reception level.

Figure 45: Cellular Lines Section

Note: If the cellular line status is ‘Not registered’, check the following:

3. The SIM card is installed and the PIN code is either disabled or specified correctly. If a PIN code

was set manually via the WBM, the system has to be restarted and the WBM screen must be

refreshed.

4. It is highly recommended that the cellular channel reception level be no less than 90 dB.

Sometimes an external antenna should be connected to W40 to reach this reception level. The

reception level is represented in the “Overview” screen.

2. Click the name of a cellular line. The line’s configuration screen opens: