User`s guide

MBR W40 – Admin’s Manual
33
Figure 37: Personal Domain Name Settings Screen
3. Specify the DDNS parameters as follows:
Parameter
More Info
Host Name
Enter your full DDNS domain name.
Connection
Select the connection to which you would like to couple the DDNS
service. In W40 there is only one option – “WAN Cellular Modem”.
Provider
Select your DDNS service provider. The screen will refresh,
displaying the parameters required by each provider.
Click Here to Initiate and
Manage your Subscription
Click this link to open the selected provider's account creation Web
page. For example, when dyndns.org is selected, the following page
will open: http://www.dyndns.com/account/.
User Name
Enter your DDNS user name.
Password
Enter your DDNS password.
User Define
Currently not in use
Wildcard
Select this checkbox to enable the use of special links such as
http://www.<your host>.dyndns.com
Mail Exchanger
To redirect all e-mails arriving at your DDNS address to your mail
server, enter your mail exchange server address.
Backup MX
Select this check-box to designate the mail exchange server to be a
backup server.
Offline
If you wish to temporarily take your site offline (to prevent traffic
from reaching your DDNS domain name), check this box to enable
redirection of DNS requests to an alternative URL, predefined in
your DDNS account. The availability of this feature depends on your
account's level and type of service.
4. Click Close. The Personal Domain Name screen appears, and the DDNS entry you defined is listed in the table.