User`s guide

MBR W40 – Admin’s Manual
27
3. Enter the MAC address to be filtered and click the 'OK' button. A MAC address list appears, upon which the
selected filtering action (allow/deny) will be performed.
Figure 27: MAC Filtering Table
 To see an overview of the WiFi settings, Security section
1. Navigate to Local Network  Wireless. The Wireless Overview screen appears. In the Wireless Overview
screen, you can find the Security Section
Figure 28: Security Section
2. Select the security type for the connection: None, Authentication Only, or Password Protected (WPA,
WPA2, WPA and WPA2 combined).
Parameter
More Info
Security Method
There are 4 security options in the W40 (WPA, WPA2, WPA and
WPA2, Authentication only)
Authentication Method
If WPA, WPA2 or WPA and WPA2 methods are chosen, use “pre-
shared key” authentication method.
Pre-Shared Key
This entry appears only if you selected this authentication method.
Enter your encryption key in the 'Pre-Shared Key' field. You can use
either an ASCII or a Hex value by selecting the value type in the
drop-down menu provided.
Note: The pre shared key is key sensitive
Encryption Algorithm
Select between Temporal Key Integrity Protocol (TKIP) and
Advanced Encryption Standard (AES) for the encryption algorithm.
Note: TKIP can be used in a mixed 802.11g/n or 802.11b/g/n modes
Group Key Update Interval
Defines the time interval in seconds for updating a group key.
 To see an overview of the WiFi settings, Transmission Properties section
1. Navigate to Local Network  Wireless. The Wireless Overview screen appears. In the Wireless Overview
screen, you can find the Transmission Properties Section