User`s guide

MBR W40 – Admin’s Manual
22
3.5 Internet Connection Tab
3.5.1 Settings
The Internet-Connection Settings screen (Internet Connection-> Settings) provides general information regarding your
WAN Internet connection, including the connection's status, protocol, speed, duration, and Internet address. Refer to
this screen for a quick status reference.
Figure 20: Internet Connection – Settings
The Settings screen provides basic information and configuration options for Internet connection supported by the
W40.
 To configure Internet connection:
1. Select your WAN connection type based on the method by which you are connected to the Internet. The
internet connection can be disabled by choosing “No Internet Connection” for this field.
2. Enter your Cellular service provider’s Access Point Name (APN). If the SIM card contains your cellular service
provider APN, by default the W40 will retrieve this information automatically from the SIM card.
3. In some cases, the cellular provider requires user authentication before allowing internet connectivity. If this
is the case with your provider, please enter your cellular provider required internet access ‘User Name’ and
‘Password’.
4. Select the cellular provider required authorization protocol.
5. Press the ‘Apply’ and then the ‘OK’ buttons.
3.6 Local Network Tab
3.6.1 Settings
The Local-Network Overview screen presents a summary of the W40 network, including a list of all connected devices:
computers, shared disks and printers. When this screen is opened, W40 begins the process of automatically detecting