User`s guide

MBR W40 – Admin’s Manual
15
3.1.1.2 Step 2: WiFi Setup
This step configures your WiFi network. W40 default SSID is "MBR_W40". You may of course change this name
according to your preference. Select the WiFi security level and password if required and then click Next.
Figure 11: Installation Wizard Wireless Setup
3.1.1.3 Step 3: Internet Connection Setup
In this step the W40 will connect to the internet automatically. You may be asked to enter the APN (Access Point
Name) parameters manually. Please consult your operator for your APN, user name, and password.
Figure 12: Internet Connection Setup
Click the “Next” button to continue.
3.1.1.4 Step 4:Cellular VoIP Setup
Your W40 telephony service is based on VoIP (Voice over Internet Protocol or Voice over IP). In order to use this
feature of the W40:
1. VoIP service must be offered by your service provider.
2. Your W40 VoIP line must be configured by the service provider and register with the service over the internet
connection.
3. Public/Fixed IP based SIM card may be required by your service provider.
Internal calls between local extensions are always enabled regardless of the availability of VoIP service. You will always
get a dial tone when using an analog phone connected to the phone port of the W40.