System information

44 221 02-FGB 101 544 Uen H - June 2009
Different levels of logging can be set depending on how much information
is desired.
Message types are specific to the logged information:
• Emergency, alert, critical and error messages report important
operation errors (e.g. a task crashed).
• Warning, notice and inform messages report important operation
information (e.g. system attack).
• Debug messages report operation details.
9.3.5.1 BSD Syslog Remote Logging
The Ericsson W3x is able to distribute the system log to a remote host
using the BSD Syslog message format on UDP.
In order to identify specific devices in a network, the product serial number
is also retrieved and sent as a parameter when the syslogd daemon is
initialized for remote logging.
9.3.5.2 Syslog Heartbeat
A regular heartbeat message can be sent to the syslog with a configurable
interval. The heartbeat messages will be classified as an alarm to simplify
the forwarding of this message to a remote syslog.
9.3.6 Fault Management
If an error condition occurs, the Alarm LED on the unit is blinking and the
corresponding cause is displayed in the WUI (on the Overview page). An
event message with severity level “Error” is also generated in the syslog.
Events that generate an alarm are such that make it impossible to send or
receive data, e.g. SIM card missing.
9.4 Interface Status and Statistics
The following subsections describe the status/statistics information that can
be displayed from the CLI and the WUI.
9.4.1 Basic System Information
The following basic system information can be displayed:
Basic System
Information
(CLI and WUI)
Product
Product ID
Serial Number
Boot Loader
Application Software
UMTS Boot Loader
UMTS Application Software
Ethernet MAC Address
WLAN MAC Address
IMEI