System information

24 221 02-FGB 101 544 Uen H - June 2009
4.3.2 W30 Frequency Band Selection
The Ericsson W30 automatically supports all supported frequency bands
when a network (3G and/or 2G) is enabled.
4.3.3 W35 InterRAT and Frequency Hopping
Handover between the UMTS (3G) and the GSM/GPRS/EDGE (2G)
networks is automatically managed by the Ericsson W35 according to the
table below:
GSM 850 <-> WCDMA 1900 handover – blind mode
GSM 1900 <-> WCDMA 1900 handover – blind mode
GSM 850 <-> WCDMA 850 handover – blind mode
GSM 1900 <-> WCDMA 850 handover – blind mode
EGSM 900 <-> WCDMA 2100 handover – blind mode
GSM 850 <-> WCDMA 850 handover – idle frame measurements
GSM 1800 <-> WCDMA 2100 handover – blind mode
GSM 850 <-> WCDMA 1900 handover – idle frame measurements
EGSM 900 <-> WCDMA 2100 handover – idle frame measurements
GSM 1900 -> WCDMA 1900 handover – idle frame measurements
GSM 1800 <-> WCDMA 2100 handover – idle frame measurements
GSM 1900 -> WCDMA 850 handover – idle frame measurements
EGSM 900 <-> WCDMA 2100 cell reselection
GSM 850 <-> WCDMA 850 cell reselection
GSM 1800 <-> WCDMA 2100 cell reselection
GSM 850 <-> WCDMA 1900 cell reselection
EGSM 900 <-> WCDMA 2100 CCO
GSM 1900 <-> WCDMA 1900 cell reselection
GSM 1800 <-> WCDMA 2100 CCO
GSM 1900 <-> WCDMA 850 cell reselection
EGSM 900
(w/BCCH/PBCCH)
-> WCDMA 2100 reselection in packet transfer
GSM 850 <-> WCDMA 850 CCO
GSM 1800
(w/BCCH/PBCCH)
-> WCDMA 2100 reselection in packet transfer
GSM 850 <-> WCDMA 1900 CCO
GSM 1900 <-> WCDMA 1900 CCO
GSM 1900 <-> WCDMA 850 CCO
EDGE <-> WCDMA cell reselection in packet transfer
GSM 850
(w/BCCH/PBCCH)
-> WCDMA 850 reselection in packet transfer
Inter-RAT NACC
2G
<-> 3G
GSM 850
(w/BCCH/PBCCH)
-> WCDMA 1900 reselection in packet transfer