System information

10 221 02-FGB 101 544 Uen A - September 2008
2 Hardware Overview
This chapter describes the hardware of the W3x terminals in terms of
housing, interfaces, LED indicators, power supply, and antennas.
2.1 Housing
The housing on the W3x terminals is designed to be either wall mounted or
standing on the desk by use of the provided table stand.
The unit (not mounted in the table stand) weights approximately 380 gr and
measures 185 mm (H) x 106 mm (W) x 45 mm (D).
2.1.1 Back Side Interfaces
The back side of the W3x terminals includes the following interfaces:
Figure 3 - Ericsson W35 back side
The interfaces are described in the tables below:
Interface Type Function
Ethernet
1-4
4 x RJ45
Ethernet LAN connectors for connecting the unit
to client PCs or an Ethernet switch/hub.
12 VDC/
2A
4 pins
Power inlet for connecting the provided power
supply adapter or an external battery pack (W35
only).
Reset button Switch
A small hole in the housing. Used to reset the
terminal to its factory default configuration.
In addition to the above, the Ericsson W35 also includes the following
interfaces for telephony and fax services: