User’s Guide Mobile Phone T10s Visit us on our website http://mobile.ericsson.
Contents at a Glance Getting Started 3 Preparing Your Phone for Use 4 Turning Your Phone On and Off 9 Display Information and Key Functions 11 Making and Receiving Calls 13 During a Call 16 Functions and Settings 19 Using the Menu System 20 Your Personal Phone Book 22 Using the Call List 28 Your Voice Mail Service 30 Personalizing Your Phone 31 Sending and Receiving Text Messages (SMS) 36 Diverting Incoming Calls 44 Security for Your Phone and Subscription 46 Handling More than One Call Simultaneously 53 S
Please note! Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not. The symbol on our products signifies that they have been certified according to the EMC directive 89/336/EEC, the Telecommunications directive 91/263/EEC, and the Low Voltage directive 73/23/EEC when applicable.
GETTING STARTED Preparing Your Phone for Use 4 Turning Your Phone On and Off 9 Display Information and Key Functions 11 Making and Receiving Calls 13 During a Call 16
Preparing Your Phone for Use Overview Front Antenna Indicator light Volume keys Earpiece Display Keypad Microphone Flip Microphone channel Back Threaded hole for belt clip SIM release button Battery Battery release catch 4 Preparing Your Phone for Use
Assembly You need to do the following to use your phone: • insert the SIM card • attach the battery to the phone • charge the battery The SIM Card When you register as a subscriber with a network operator, you get a SIM (Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your Phone Book information, among other things. SIM cards come in two sizes.
The PIN Most SIM cards are supplied with a security code or PIN (Personal Identity Number), which you need to access the network. Every time you turn on your phone, it prompts you to enter your PIN. You will find your PIN in the information from your operator. Some operators may have services that require a second PIN, your PIN2. You should be careful with your PIN, since it is your protection against unauthorized use of your subscription.
• the indicator light on the top of the phone starts flashing red. Note! The phone turns itself off when the battery can no longer power it satisfactorily. Charging the Battery 1. Make sure that the battery is attached to the phone. 2. Connect the charger to the mains. 3. Connect the charger to the phone as shown in the picture. The flash symbol on the plug must face upwards. To indicate charging: • the battery meter in the display pulses continuously.
Removing the Battery 1. Turn off the phone. 2. Press the catch on the bottom of the battery. 8 Preparing Your Phone for Use 3. Lift the battery up and away from the phone.
Turning Your Phone On and Off Turning Your Phone On • Press and hold the N O (ON/OFF) key until you hear a click. If “Enter PIN” Appears in Display Enter PIN Some SIM cards are protected with a PIN code. If Enter PIN appears in the display after you have turned on the phone, do this: 1. Enter your PIN. If you make a mistake while entering your PIN, erase the Enter PIN **** wrong digit by pressing the C L R key. 2. Press Y E S .
If your phone displays a language you do not understand, you can change it to English. To change the display language to English 1. Press the C L R key. 2. Press the L E F T arrow key. 3. Enter 0000. 4. Press the R I G H T arrow key. Network NETWORK 16:21 Normally, the name of a network appears in the display after you have turned your phone on, but sometimes there is no network that you can use.
Display Information and Key Functions Display Information Your phone display will help you to: • verify that you are dialling correctly • check your signal strength and service availability • find out if you have received messages • check which line is in use if you have the Alternate Line Service (ALS) • check battery level Icons in the Display Icons are displayed when specific functions are active or if you have received a message.
Icon/Indicator: Name: Description: Line indicator Tells you which line is in use if you have the Alternate Line Service. Home zone indica- The house icon indicates that the tor phone is within the home zone. Will not appear on all networks. Key Functions The keys have other functions when you access the menu system “Using the Menu System” on page 20. Key: Use: YES To make calls and answer calls. NO To turn the phone on or off. Press and hold the key. To end a call.
Making and Receiving Calls In this chapter, we assume that you have turned on your phone and that you are within range of a network. If you are abroad, you may use other networks, provided your home network has an agreement that allows you to do this (see also “Setting Network Preferences” on page 58). Making a Call NETWORK 0123456789 1. Enter the area code and phone number. 2. Press Y E S .
Making International Calls 1. Press and hold the 0 key until a + sign appears. 2. Enter the country code, area code (without any leading zero) and phone number. 3. Press Y E S . Making Emergency Calls 1. Enter 112 (the international emergency number). 2. Press Y E S . The international emergency number 112 can be used in most countries, with or without a SIM card inserted, if a GSM network is within range.
Ciphering Ciphering is a built-in feature that scrambles your calls and messages to provide additional privacy. An exclamation (!) mark, shown next to the handset icon in the display during a call, indicates that ciphering is currently not being provided by the network.
During a Call Your phone has several functions which you might find helpful while a call is in progress. Changing the Earpiece Volume To change the earpiece volume during a call • Press the volume keys (U P or D O W N ) on the side of the phone. Pressing U P increases the volume. Pressing D O W N decreases the volume. Muting the Microphone To turn the microphone off temporarily during a call 1. Press and hold the C L R key. Mute appears in the display. 2.
Sending Tone Signals To use telephone banking services or to control an answering machine, you need to use codes. These codes are sent as tone signals (also known as DTMF tones or touch tones). • Press the appropriate keys (0-9, * and #). Tip! You can also save a code together with a phone number in the Phone Book. See “Your Personal Phone Book” on page 22. Checking Duration/Cost of Call During a call, the display shows the duration in minutes and seconds.
18 During a Call
FUNCTIONS AND SETTINGS Using the Menu System 20 Your Personal Phone Book 22 Using the Call List 28 Your Voice Mail Service 30 Personalizing Your Phone 31 Sending and Receiving Text Messages (SMS) 36 Diverting Incoming Calls 44 Security for Your Phone and Subscription 46 Handling More than One Call Simultaneously 53 Setting Network Preferences 58 Knowing the Call Time/Call Cost 61 Using Two Voice Lines 63 Calling from Your Car 64 Calling Card or Credit Card Calls 66 Sending and Receiving Faxes and Data 68 So
Using the Menu System You can find all your phone functions in the menu system. You use the menu system every time you want to change a setting in your phone, such as the ring signal. You also use the menus to get the most out of your phone: to set the alarm clock, send text messages, store important phone numbers, etc. The menus are arranged in a continuous loop, which you move (scroll) through with the R I G H T and L E F T arrow keys. Each menu contains a list of options.
Interpret this instruction as follows: < Menu Mail 1. From the standby mode, use the L E F T or R IG H T arrow keys to scroll to > the M ail menu. The arrows on either side of the word Mail mean that you can scroll to another menu. < Mail Read messages 2. Press Y E S to select the menu. > Now you are in the Mail menu. The name of the menu that you have chosen is shown at the top of the display (Mail).
Your Personal Phone Book You can create a personal phone book by storing phone numbers and accompanying names on the SIM card (SIM memory) and in the phone (phone memory). You use the Phone Book menu for storing and recalling all the phone numbers in your personal phone book.
Entering Letters You can only enter letters when you are using the phone book and when you are composing a short message (SMS), see “Sending and Receiving Text Messages (SMS)” on page 36. Press the appropriate key, 1–9, 0 or #, repeatedly until the character you want appears in the display. Press… to get… 1 Space - ? ! ‚ .
To store in a position of your choice in the SIM memory: • Press R I G H T (repeatedly) until the suggested position number disappears. Then enter a position number of your choice. Press Y E S to store. To store in the first empty position in the phone memory: • Press R I G H T (repeatedly) until the suggested position number disappears. Then press # twice, followed by Y E S .
When a Memory is Full If you try to store a phone number and the memory you want to store it in is full, the phone suggests a position number in the memory that is not full. When Both Memories are Full If both memories are full, the phone does not suggest a storage position. If you still want to store the number, you have to erase an old number by entering a position that is already occupied and press Y E S . Erasing a Storage Position from the SIM Memory 1. Scroll to Phone book , Y E S , Erase , Y E S . 2.
Calling Using the Position 1. Clear the display. Position recall Position: 2. Scroll to Phone book , Y E S , Position recall, Y E S . 10 3. Enter the position number you want to call, or scroll with the arrow keys until you find it. 4. Press Y E S to call the number. Speed Dialling (Memory Positions 1 - 9) Note! Speed dialling can only be used when the phone is in standby. 1. Clear the display. 2. Enter the position number, 1– 9, and press Y E S .
easily copy the phone book back to the memory of your choice. Also, as you fill up the phone book memories, you might want to move entries from one memory to another. Copying a Number from SIM Memory to Phone Memory Copy card From start position: 12 Copy card To start position: 15 want to copy to the phone memory and press Y E S . 3. Enter the number of the first memory position in the phone memory you want to copy to and press Y E S . 4. Press Y E S to copy. Sveinn Copy to 1.
Using the Call List The Call List This chapter describes the Call List function, which is a type of telephone number log or a memory that stores information (time, date, phone number and name) about the last 30 incoming and outgoing calls. Once your list exceeds 30 calls, the oldest one is deleted. You need to activate the Call List function before any calls are stored in the list. The numbers that you have dialled are always stored in the Call List.
Turning the Call List Off • Scroll to Settings , Y E S , Call List, Y E S , On , Y E S . Calling a Number from the Call List 1. Scroll to Info , Y E S , Call List, Y E S . 2. Scroll to the number that you want to call. 3. Press Y E S to make the call. Missed Calls NETWORK Calls:1 If you have missed a call, the phone shows Calls: 1 , where the number 1 indicates the number of unanswered/missed calls. • Press Y E S to go directly to the call list. Erasing a Number from the Call List 1.
Your Voice Mail Service Note! Not all operators have this service. The service also depends on your subscription. NETWORK Check? The answering service of your network allows callers to leave a voice message when you cannot answer your calls. When you receive a voice message, you hear a signal and the message Check? appears in the display, together with the voice mail indicator. The indicator light on the top of the phone flashes green.
Personalizing Your Phone Your phone includes a number of functions which let you adapt your phone to your own personal needs in different situations. Note that some of the functions allow you to have one setting when the phone is handheld and another when it is connected to handsfree equipment. See “Calling from Your Car” on page 64. Ring Signal Volume You can set the volume in six steps. The first step means that two clicks will be heard when you receive a call.
Different Ring Signals for Line 1 and Line 2 Ring type Line 1 (Mix) < If you subscribe to the Alternate Line Service (ALS), L1 or L2 , depending on > the line in use, is displayed instead of Phone. This means that you can set different ring signals for the two lines.
• Press 0 to raise the note one octave. 5. To listen to your melody, press Y E S . 6. Press Y E S again to save it or press N O to continue editing. Vibrating unit You can set the phone´s vibrating unit to Off, On all the time, or On when the ring signal is turned off. To set the vibrating unit Settings < Vibrate > (0n when silent) 1. Scroll to Settings , Y E S , Vibrate , Y E S . 2. Select the desired setting.
key. It comes on again when you press a key, or when you receive a call or message < Settings Light (Auto) To set the display light > 1. Scroll to Settings , Y E S , Light, Y E S . 2. Select the display light setting you want. Display Language Most modern SIM cards automatically set the display language to the language of the country where you bought your SIM card. If this is not the case, the default language is English. To change the display language < Settings Language (Auto) > 1.
Date When the phone is in standby mode, you can press a volume key to see today’s date. < Settings Clock/Date To set the date format > 1. Scroll to Settings , Y E S , Clock/Date , Y E S , Set date , Y E S . 2. Select the date format you want. To set the date 3. Enter the year (two digits) and then press Y E S . 4. Enter the month and day in the same way. Auto Store You can choose to let the phone ask you if you want to store a called or incoming phone number that is not stored in your phone book.
Sending and Receiving Text Messages (SMS) The Short Message Service (SMS) allows you to send and receive text messages consisting of up to 160 characters. You can receive text messages when the phone is in standby mode, during a call or when incoming calls are diverted to another phone number. If your SIM card does not contain the phone number to your network service centre, you must specify the number yourself. Otherwise you cannot reply to messages received or send your own messages.
To read the message later • Press NO when you see the Read now? prompt. The message is stored in the message memory as New and the envelope Network 12:15 icon appears at the bottom of the standby display. Reading a Stored Message 1. Scroll to Mail , Y E S , Read messages , Y E S . 2. Scroll to the message you are looking for. New means an unread message. New 12:15 From: 123456 Old means a read message. Sent means a message that you have sent yourself.
Erasing a Message 1. Scroll to the end of the message. The Reply? prompt appears. 2. Press N O . The message Erase? appears. 3. To erase the message from the message memory, press Y E S . The next message automatically appears in the message list. Tip! You can press and hold C L R anywhere within the menu that handles your message to erase it. When Erase? appears, press Y E S .
Storing a received message in the SIM card memory 1. Scroll to the end of the message. The Reply? prompt appears. 2. Press N O . The Erase? prompt appears. 3. Press N O . The Store? prompt appears. 4. Press Y E S . The message automatically moves from the message memory to the SIM Stored on card 3(15) card memory. The display now shows the position of the message. For example, if it is the third of fifteen that the phone can store.
< Options Reply Req (Off) To set the Reply requested > • Scroll to Mail , Y E S , Options , Y E S , Reply Req , Y E S . Composing a Text Message For more information on how to enter text, see “Your Personal Phone Book” on page 22. Checking the First Characters You Have Entered • Press L E F T until you reach the characters you want to view.
Sending a Stored Message 1. Scroll to Mail , Y E S , Send message , Y E S . 2. Scroll to the stored message you wish to send and press Y E S . 3. Now you can edit your message. When you are finished, press Y E S . 4. Enter the receiver’s phone number (or recall it from the phone book). 5. To send the message, press Y E S . Own Messages You can store up to ten standard messages, to be re-used whenever you want. The messages must not exceed 30 characters.
Area Information Message Types Each type of Area Information message is identified by a three-digit code.
To erase or replace a code 1. Scroll to Mail , Y E S , Options , Y E S , Area info , Y E S , Edit list, Y E S . 2. Scroll to the code you wish to erase/replace and press Y E S . 3. To erase, scroll to Erase? and press Y E S . To replace, scroll to Chg code? and press Y E S . Enter the new code and press Y E S . Receiving an Area Message When you receive Area information, the message is stored in the phone memory.
Diverting Incoming Calls If you want to make certain that your incoming calls are correctly handled when you are unable to answer them, you can use the Call Divert service to divert them to another phone number. Note! The Call Divert service may not be available on all networks. The Call Divert service lets you: • divert calls if you are already on the phone, On busy.
3. Select Get status . < All calls Get status < Divert Check all The message Please wait appears, followed by a message which informs you > whether the call divert is activated or not. To check the status of all call diverts • > Scroll to Divert , Y E S , Check all , Y E S . The message Please wait appears, followed by information about all call diverts, i.e. whether they are activated or not. Cancelling Call Diverts To cancel a certain call divert 1. Scroll to Divert , Y E S . 2.
Security for Your Phone and Subscription There are several ways to protect your phone and subscription from unauthorized use. Anything from a simple keypad lock to full phone number control. Keypad Lock The Keypad Lock helps you to avoid accidental dialling, which can happen if NETWORK 11:33 you keep your phone in your pocket. An icon in the shape of a key in the display informs you that the keypad is locked. The keypad lock is automatic.
Some SIM cards are protected with a PIN (Personal Identity Number) at the time of purchase. If the SIM card lock is activated, you have to enter the PIN PIN Blocked. Unblock? every time you turn on your phone. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message PIN Blocked. Unblock? If this happens you need to unlock it to access your sub- scription. Unblocking Your SIM Card 1. Press Y E S . 2.
Cancelling the SIM Card Lock 1. Scroll to Access , Y E S , Card Lock , Y E S , Unlock card , Y E S . 2. Enter your PIN and press Y E S . The message Unlocked confirms that the card lock is now cancelled. Note! This only works if your SIM card allows you to cancel the card lock. Phone Lock The phone lock protects the phone against unauthorized use if it is stolen. It is not activated when you buy the phone. You can change the default security code 0000 to any three- to eight-digit personalized code.
Call Barring The Call Barring service allows you to bar different types of outgoing and incoming calls. Note! This service may not be available on all networks or may require a separate subscription.
3. Enter the new password and press Y E S . 4. Enter the new password a second time and press Y E S . The message Please wait appears, followed by a message confirming that the password has been changed. Fixed Dialling Fixed Dialling is a way of restricting outgoing calls. It requires a SIM card that allows fixed numbers to be stored. The fixed numbers are protected by your PIN2. How many numbers you can store depends on your SIM card.
Editing a Stored Fixed Number 1. Scroll to Phone book , Y E S , Fixed numbers , Y E S , Edit, Y E S . 2. After you enter your PIN2, you can change the position number, the name or the fixed number in the same way as with an ordinary phone number. Deleting a Stored Fixed Number 1. Scroll to Phone book , Y E S , Fixed numbers , Y E S , Edit, Y E S . 2. Scroll to the fixed number you want to delete. 3. Press and hold C L R . 4. Enter your PIN2 and press Y E S . Erase? appears. 5. Press Y E S .
3. Scroll to the position that you want to erase and press C L R . 4. The phone asks you Erase? 5. Press Y E S .
Handling More than One Call Simultaneously Your phone allows you to handle more than one call simultaneously. This means that you can put a call that is in progress on hold, while you make or answer a second call, and then switch between the two calls. You may also set up a Conference Call to have a joint conversation with up to five people. You may put an individual or a group of conference members on hold while you add other people to the conference call.
Receiving a Second Call while a Call Is in Progress If the Call Waiting service is activated, you will hear a tone in the earpiece if < Answer? > you receive a second call. The question Answer? appears in the display. You can do one of the following: Put the Current Call On Hold and Answer the Waiting Call • 1 on hold Press Y E S . The message 1 on hold appears. Continue the Current Call and Reject the Waiting Call • Press N O . You can also: 1. Press L E F T .
Connect the Two Calls (Call Transfer) Handle calls Transfer < call? > 1. Press L E F T followed by Y E S to select the Handle calls menu. 2. Scroll to Transfer call? and then press Y E S . The two calls are now connected to each other, and you are disconnected from both calls. Note! The Call Transfer service may not be available on all networks. Join the Two Calls into a Conference Call < Handle calls Join > calls? 1. Press L E F T followed by Y E S to select the Handle calls menu. 2.
Adding New Participants to the Conference Group You can put the conference group on hold and then add new participants. To add a new participant 1. Press Y E S to put the conference group on hold. Conf held 2. Call the third person you wish to include in the conference group. 3. Press L E F T followed by Y E S to select the Handle calls menu. Handle calls < Join > calls? 4. Scroll to Join calls? and then press Y E S .
To make the call 1. To put the conference group on hold, press Y E S . Conf held 2. Enter the number you wish to call and press Y E S . To switch between the new call and the conference group • Press Y E S . To end the new call and return to the conference group 1. Put the conference group on hold. < Handle calls Release > active? 2. Press L E F T followed by Y E S to select the Handle calls menu. 3. Scroll to Release active? and then press Y E S . Ending the Conference Call • Press N O .
Setting Network Preferences Searching for Networks When you turn on the phone, it searches for the last accessed network. If this is not within range, you may use another network, provided your home network has an agreement that allows you to do so. This is called roaming. The order of preference in which the phone selects a network is determined by a list of preferred networks on your SIM card. The Networks menu includes a number of functions that let you determine how the phone searches for a network.
Message Meaning Forbidden The name of the network is included in a list of forbidden networks on your SIM card. You can normally not select this network. See “List of Forbidden Networks” below. Available The name of the network is not included in the preferred or forbidden list on your SIM card. You can select this network, but you might not be able to use it. Starting an Automatic Network Search Networks < New search > • Scroll to Networks , Y E S , New search , Y E S .
< Edit list Network 1 Adding a Network to the List 1. Scroll to Networks , Y E S , Edit list, Y E S . > 2. Scroll to the first free position in the list and press Y E S . The Add net? prompt appears. Edit list 6 If you scroll to a position that is already occupied, press Y E S and then Add net? scroll with the arrow keys until Add net? appears. 3. Press Y E S and scroll with the arrow keys until you find the network that you want.
Knowing the Call Time/ Call Cost Call Information The display shows the duration of a call in progress. When you end the call, the call duration information is shown for another five seconds. If your network and SIM card support this feature, you can have the call cost (or the number of call units) displayed. Settings < Call info > (Time: Outg.) To select the call information you want 1. Scroll to Settings , Y E S , Call info , Y E S . 2. Select Time: Outg , Time: All or Cost .
Determining the Call Cost If you select the Cost option in the Call info function in the Settings menu, the Price function appears in the Info menu. However, to be able to use the Price function, both your network and your SIM card must support it. The Price function lets you enter and vary the price per call unit. The price entered is stored on your SIM card.
Using Two Voice Lines Note! This service may not be available on all networks and may require a separate subscription. Your phone supports two voice lines (Alternate Line Service, ALS) with different phone numbers, Line 1 and Line 2. This is useful if you want to keep business calls and private calls on separate lines. You can only send and NETWORK 11:33 receive text messages (SMS) on Line 1. The line currently selected is indicated in the display with a line indicator and the digit 1 or 2.
Calling from Your Car By using the Ericsson portable or vehicle handsfree solutions, you can be on the phone without using your hands to hold it. Handsfree Types If you use a Vehicle Handsfree Solution, you can choose between two different ways in which your phone can handle the speech. This is done in the Handsfree sub-menu. Handsfree Type 1 Handsfree Type 1 means that the phone handles the call in semi-duplex mode.
• Any key : If you use the phone with handsfree equipment and this function is turned on, you can answer an incoming call by pressing any key, except the N O key and the volume keys. • Auto : If you choose the automatic answering mode, an incoming call is answered automatically after one ring signal. Selecting Answering Mode 1. Scroll to Settings , Y E S , Answering mode , Y E S . 2. Select a mode.
Calling Card or Credit Card Calls When making international or long distance calls, you may not want your operator to charge you for these calls on your normal account. If you have a credit card or a calling card, you may want to re-direct the charges to one of those accounts instead. Your phone is all set for making this procedure as easy as possible for you. Activating the Calling Card Feature Access < Call cards security 1. Scroll to Access , Y E S , Call cards security, Y E S . > 2.
3. Select card position (Card 1 or Card 2). 4. Enter the access number (the phone number) to the calling card server. The numbers are entered in the same way as in the ordinary phone book. 5. Press L E F T or R I G H T . 6. Enter the verification code to your calling card server. 7. To store the calling card number, press Y E S .
Sending and Receiving Faxes and Data Note! To be able to use various communications services you need the appropriate accessories and programs. If you have a SIM card that does not support separate fax and data numbers, you need to activate the data menus. When the Data menus are activated, a new menu appears in your phone: Next call type . Settings < Data menus > (Off) Activating the Data Menus • Scroll to Settings , Y E S , Data menus , Y E S , On , Y E S .
Some Useful Functions Special Functions Menu If a phone number is present in the display, you can press R I G H T , followed by YES, • to select the Special functions menu. This menu lets you: edit the phone number • insert a p (pause) when sending DTMF tones • show or hide your phone number when calling somebody To edit the number in the display 1. Scroll to Special functions , Y E S , Edit number, Y E S . Edit number 01234567890_ 2.
CHECK Menu If you enter more than 20 characters (0 –9 , * , # , + and p ), the first characters disappear from the display. Instead, a left arrow is shown in front of the characters. To check the first characters 1. Press R I G H T . 2. When you are finished, press L E F T . If you wish to use any of the Special functions, press R I G H T instead. Alarm Clock The phone has an alarm function.
3. Scroll with R I G H T / L E F T to the division sign (/) and press Y E S . 4. Enter 32. 5. Scroll with the R I G H T / L E F T to the equal sign (=) and press Y E S . You can also press # to get the answer. 6. To clear the display, press C L R . To enter a decimal point • Press *. To enter the multiplication sign (*) • Press * twice.
72 Some Useful Functions
ADDITIONAL INFORMATION Troubleshooting 74 Quick Keys 76 Technical Data 77 Glossary 78 Guidelines for Safe and Efficient Use 83 Warranty 87 Declaration of Conformity 89 Index 91
Troubleshooting This chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but most of the problems you encounter are easy to correct yourself. Error Messages Insert card Insert card There is no SIM card in the phone. Insert a SIM card. See “The SIM Card” on page 5. 112 only 112 only 16:21 If the message 112 only is displayed, you are within range of a network but you are not allowed to use it.
Phone locked Phone locked The phone is locked. To unlock the phone, see “Phone Lock” on page 48. Enter lock code Enter lock code Your phone comes with the default security code, 0000. You can change it to any three- to eight-digit personalized code. See “Phone Lock” on page 48. Number not permitted Number not permitted The Closed User Groups function is activated and the number you have dialled is not part of a group. See “Closed User Groups” on page 51.
Quick Keys Several keys on your phone can be used to optimize the phone’s functionality and decrease the number of times you need to press a key. Some of the key combinations demand that your phone is in a certain mode and some can be made from the standby mode.
Technical Data General System GSM 900/GSM1800 SIM card Small plug-in card, 3V or 5V type Dimensions Size 105 x 49 x 24mm Weight with battery 146g Weight without battery 80g Ambient temperatures Max +55°C Min –10°C Technical Data 77
Glossary Advice of Charge (or AoC) enables you to monitor the cost of calls made from your mobile phone. Details of the last call and total calls made are shown in the phone display. Alternate Line Service (or ALS) enables you to have two lines and two different phone numbers on one subscription for your mobile phone. This makes it possible to have separate numbers for business and personal calls. To use this service, it must be supported by your network.
Dual Band GSM 900/1800 The Ericsson T10 is a dual band phone, which means that you can use your phone on two different kinds of networks – the GSM 900 and the GSM 1800 (also called PCN or DCS 1800) systems. A dual band phone that combines the two standards can use both frequencies. This increases capacity in densely populated urban areas, and consequently improves the coverage offered by your network operator.
International Prefix (+) Mobile phone (+) prefix that automatically adds the correct international code in front of a telephone number when dialling out of a country. You then have to add the code of the country you are calling. International Roaming A mobile phone feature that allows you to switch between networks offering coverage abroad. Your mobile phone automatically selects a network or system (your home network), but if it is not in range or unavailable, it will select another system.
PIN2 Personal Identification Number 2 – an authorization code which is used only for special services. PUK Personal Unblocking Key – used to unlock a blocked SIM card. This comes with your subscription. Roaming Within your home network, this means that your mobile phone automatically sets up communication procedures with different radio base stations when on the move. Semi-Duplex In handsfree equipment, full duplex means that the connection is open for both parties to talk simultaneously.
Subscription is the contract that you have with the service/network provider. To use your phone, you need to have a subscription to a network. You get a SIM (Subscriber Identity Module) card with your subscription. The services included in your subscription depend on your choice of operator and/or subscription. So some of the services and functions described in this manual may not be accessible to you.
Guidelines for Safe and Efficient Use Note! Read this information before using your portable phone General Since its introduction in the mid 1980s the portable phone is one of the most exciting and innovative products ever developed. With it, you can stay in contact with your office, your home, emergency services, and others. Your telephone is a radio transmitter and receiver. When it is ON it receives and also sends out radio frequency (RF) energy.
Efficient Phone Operation How to use your phone for optimum performance with minimum power consumption: Hold the phone as you would any other telephone. While speaking directly into the mouthpiece, angle the antenna in a direction up and over your shoulder. If the antenna is extendable, it should be extended during a call. Do not hold the antenna when the phone is IN USE.
Electronic Devices Most modern electronic equipment, for example, equipment in hospitals and cars, is shielded from RF energy. However, RF energy from telephones may affect some electronic equipment. Turn your phone OFF in health care facilities when regulations posted in the areas instruct you to do so. Always request permission before using your phone near medical equipment.
Children Do not allow children to play with your phone. It is not a toy. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna for example). Children could also damage the phone or make calls that increase your telephone bills. Blasting Areas To avoid interfering with blasting operations, turn your unit OFF when in a “blasting area” or in areas posted “turn off two-way radio”. Construction crews often use remote control RF devices to set off explosives.
Warranty If your Ericsson product requires warranty service you should return the product to the dealer/retailer from whom it was purchased. If your Ericsson product requires warranty service when you are abroad, the service is available in those countries listed on your International Warranty Certificate. In the event of difficulty, details of our authorized service network are available from your local Ericsson subsidiary.
only be accepted as a proof of purchase when presented to the dealer from whom the product was purchased. 2. The warranty is not applicable in circumstances other than defects in material, design and workmanship. The warranty does not cover the following: • Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear, exchange of faulty batteries or upgrading of software due to changes in network parameters.
Declaration of Conformity We, Ericsson Mobile Communications AB of Nya Vattentornet 221 83 Lund, Sweden declare under our sole responsibility that our product Ericsson type 110 1002-BV to which this declaration relates, conforms to the appropriate standards TBR 19, TBR 20, TBR31, TBR32, ETS 300 342-1 and EN 60950, following the provisions of Teleterminals directive 91/263/EEC, EMC directive 89/336/EEC, and Low voltage directive 73/23/EEC.
90 Declaration of Conformity
Index A Alarm clock 70 Alternate Line Service (ALS) 63 Answered calls indicator 28 Answering calls 14 Answering service. See Voice Mail Antenna 4 Area information 41 message types 42 receiving area messages 43 B Banking by phone 24 Barring calls.
D Date 35 format 35 setting 35 Dialled numbers indicator 28 Display 4 indicators 11 language 9, 34 light 33 Divert indicator 11, 44 Diverting calls. See Call divert DTMF pauses 69 DTMF tones 17 E Earpiece 4 volume 16 Emergency calls 14 Ending calls 13 Entering letters 40 Error messages 74 F Fax, sending and receiving 68 Fixed dialling 50 activating 50 cancelling 50 Fixed numbers 50 editing 51 storing 50 Flip 4 Forbidden networks 59 Forwarding calls.
Network 10, 58 forbidden 59 preferred 59 search modes 60 selection 58 Network name 10 P Pause (DTMF) 24, 69 Personal ring signal 32 phone 37 Phone book 22 calling from 25 card memory 22 changing a name 26 changing phone number 26 copying 27 erasing phone number 25 keeping up to date 26 phone memory 22 storing names 23 storing numbers 23 Phone icon 22 Phone lock 48 activating/cancelling 48 auto lock 48 changing the security code 48 full lock 48 Phone memory 22, 24 Phone number displaying own 34 Phone number
Storing names 23 numbers 23 T Tape loops.
