Operating instructions

Item
Specification
Connector type
RJ-45 (100/1000 Base T)
Connector designation
Ge 1 /2 Ge 3 /4
Pin outs
(Unused pins are not connected)
Pin 1 - Tx Out(+)
Pin 2 - TX Out (-)
Pin 3 - Rx In (+)
Pin 6 - RX Out (-)
Status and Activity Indication
Each Ethernet Data Port has a rear panel mounted status LED associated with it to indicate
link status, activity and speed as follows:
Left (Green) LED
Link Speed
LED Status
No Link
Off
- - - - - - - - - - - - - - -
- - -
100 Mbps
Flash Off x 2
- - - -
1000 Mbps
Flash Off x 3
- - - - - -
The left LED flash sequence period is 1 s, with the short flash duration being 100 ms.
Right (Yellow) LED
Link Activity
LED Status
No Link
Off
- - - - - - - - - - - - - -
- - - -
Link
On
Activity
Flash
- - - - -
Refer to:
Operation and Control > Ethernet Data for Control Port Parameters.