Operating instructions

Item
Specification
Connector type
RJ-45 (100/1000 Base T)
Connector designation
Ctl 1/2
Pin outs
(Unused pins are not connected)
Pin 1 - Tx Out(+)
Pin 2 - TX Out (-)
Pin 3 - Rx In (+)
Pin 6 - RX Out (-)
Status and Activity Indication
Each Ethernet Control Port has a rear panel mounted status LEDs associated with it to
indicate link status, activity and speed as follows:
Left (Green) LED
Port
Status
Link
Speed
LED Status
Active
Port
No Link
Off
- - - - - - - - - - - -
- - - - - -
100 Mbps
Flash Off
x 2
- - -
-
1000
Mbps
Flash Off
x 3
- - - -
- -
Spare
Port
No Link
Off
- - - - - - - - - - - -
- - - - - -
100 Mbps
Flash On
x 2
- - - - - - - -
- - - - - -
1000
Mbps
Flash On
x 3
- - - - - - -
- - - - -
The Right LED flash sequence period is 1 s, with the short flash duration being 100 ms.