Operating instructions

Home > SPR1100 Handbook > Installing the Equipment > Mounting in a Rack > Fixing

Fixing

Overview

The equipment is designed for fixed use only and has been shipped with fixing brackets

suitable for a standard 19-inch rack. When installed in a rack, it should be secured using the

fixing brackets. In addition, support shelves must be used to reduce the weight on the

brackets. Ensure it is firmly and safely located and it has an adequate flow of free-air.

Fixing the Unit

Slide the unit onto the chassis supports and affix to the rack by means of an M6 x 18 mm

panhead screw in each corner.

A freestanding unit should be installed on a secure horizontal surface where it is unlikely to

be knocked or its connectors and leads disturbed.