Operating instructions

Home > SPR1100 Handbook > Appendices > Redundancy Modes > 1+1 Multi-Unit Redundancy > Configuration
1 + 1 Redundancy Configuration
Overview
The 1 + 1 Redundancy configuration GUI allows configuration and control of a 1 + 1
Redundancy group. It can be accessed by opening the web GUI, selecting "Configure",
selecting "System", then selecting "Standalone 1 + 1 Redundancy"
The GUI comprises of the following:
Standard Buttons ("Back", "Up", "Refresh", "Apply Changes")
Actions Buttons ("Manual Configuration Copy" x 2, "Set Primary Active", "Set
Secondary Active")
"1 + 1 Redundancy" Configuration Settings
"Primary Device" Status
"Secondary Device" Status
Standard Buttons